Servo for DF 41" type hull

[martin]

I assume this size hull will need a hi torque servo, What would be a good choice out of the Hitech range. Also any more suitable servos for good performance. Thanks

[properchopper]

HobbyPartz : EXI - D - 226 F ; 180.5 oz/in @ 6V , coreless, digital, metal gear, ball bearing -centers like a guillotine - $ 14.70 !!!

After trashing many Hitec 645MG's (paper thin gears)@ $ 35- $40 , I use the EXI's - especially in high torque applications like my OPC Tunnel. Can't beat the price/performance.

[JMSCARD]

HobbyPartz : EXI - D - 226 F ; 180.5 oz/in @ 6V , coreless, digital, metal gear, ball bearing -centers like a guillotine - $ 14.70 !!!

After trashing many Hitec 645MG's (paper thin gears)@ $ 35- $40 , I use the EXI's - especially in high torque applications like my OPC Tunnel. Can't beat the price/performance.

boy this is good to know properchopper... those look like a deal... and if you use em I'm in!!!

[Darin Jordan]

I use this in my 45" Delta Force Sniper Gas mono....

http://www.spektrumrc.com/Products/D...odID=SPMSS6030



S6030 Digital Surface Servo - High Torque
Product Specifications
Size Category: Standard
Type: Digital
Application: 1/10 scale servo for monster trucks, buggies and truggies
Torque: 20 kg-cm / 278 oz-in @ 6V
Speed: 0.15 sec/60° @ 6V
Length: 40mm
Width: 20mm
Height: 37mm
Weight: 52 g / 1.8 oz
Bushing Or Bearing: Bearing
Bearing: Dual
Motor Type: Coreless
Gear Type: Metal
Gear Material: Titanium
Voltage: 4.8V or 6.0V

[properchopper]

boy this is good to know properchopper... those look like a deal... and if you use em I'm in!!!

Oh, I forgot to mention that HobbyPartz shipping [USA] is FREE !!

[martin]

HobbyPartz : EXI - D - 226 F ; 180.5 oz/in @ 6V , coreless, digital, metal gear, ball bearing -centers like a guillotine - $ 14.70 !!!

After trashing many Hitec 645MG's (paper thin gears)@ $ 35- $40 , I use the EXI's - especially in high torque applications like my OPC Tunnel. Can't beat the price/performance.

Thats a very good spec servo at an even better price.

[6S HYDRO]

cant pull up the hobbypartz site

[properchopper]

cant pull up the hobbypartz site

I just pulled it up; takes a few sec to load. They also have some interesting boat stuff

[martin]

I just pulled it up; takes a few sec to load. They also have some interesting boat stuff

Bit of a change of subject but can you recomend a good all round lipo charger for up to 6s.

[FighterCat57]

Bit of a change of subject but can you recomend a good all round lipo charger for up to 6s.

I have two of these; http://www.hobbypartz.com/thac6smbachw.html
They do everything I've wanted and then some.