Swordfish 200 Amp Low Voltage

**FighterCat57** · 10-21-2010, 05:45 PM

I want one. =)

**forescott** · 10-21-2010, 05:56 PM

Me too. Waiting un-patiently.

**Insaniac** · 10-21-2010, 06:02 PM

Originally Posted by ray schrauwen

Q: Is it me or is the 120 amp unit kind of sensitive at the start?

I've only setup throttle but, I find it's extremely sensitive to throttle touch unlike ALOT of BL esc's.

Of course its on all defaults settings and on an ARC motor that is a very different animal if you could see how thick the windings are you would agree...

Maybe I need to progran it? Runs cool with a cool motor & batts...

We'll see...

Maybe try the "soft" start throttle program mode?

**Jacked1** · 10-21-2010, 11:27 PM

Me too! Haha

**ray schrauwen** · 10-21-2010, 11:49 PM

Originally Posted by Insaniac

Maybe try the "soft" start throttle program mode?

Will try it, thanks!

**dariomonguio** · 10-25-2010, 02:21 PM

I am interested in 2 units
Steven think you have this card to configure the esc?, has more adjustments that ose

**Simon170** · 10-25-2010, 02:47 PM

I'm torn between this and Turnigy/seaking 180A...

**Insaniac** · 10-25-2010, 02:48 PM

Originally Posted by dariomonguio

I am interested in 2 units
Steven think you have this card to configure the esc?, has more adjustments that ose

Which ESC?

**dariomonguio** · 10-25-2010, 02:57 PM

Originally Posted by Insaniac

Which ESC?

Swordfish 200 Amp Low Voltage when available

**Steven Vaccaro** · 10-25-2010, 04:24 PM

Not sure if that one will work. Its not available to me from Hifei as far as I know, but will ask.

200's are in a box in customs. I should have them tomorrow!

**dariomonguio** · 10-25-2010, 04:59 PM

Steven, please let me know because I have a trip to America next month to see family.
the program card for marine esc, is this

http://www.hifei.com/en/News_View.asp?NewsID=79

**Jacked1** · 10-25-2010, 06:11 PM

I am gonna need a lot of these once summer hits! :D

**onegreenray** · 10-25-2010, 06:57 PM

i am down for at least one maybe two, i just blew the turnigy 180 on 6s.

**FighterCat57** · 10-25-2010, 07:00 PM

Originally Posted by onegreenray

i am down for at least one maybe two, i just blew the turnigy 180 on 6s.

If you just blew a 180 on 6s, I'd really look at that setup. That's 4000 watts.

**onegreenray** · 10-25-2010, 07:32 PM

i was running 2 turnigy 3 s 40c 5000mah on a octura 642 with a castle 1512 1.5y.i have been trying for two days to figure out what i did wrong.

**ray schrauwen** · 10-25-2010, 07:41 PM

Originally Posted by Steven Vaccaro

Not sure if that one will work. Its not available to me from Hifei as far as I know, but will ask.

200's are in a box in customs. I should have them tomorrow!

Shoot some pics when you get them Steve....

**FighterCat57** · 10-25-2010, 08:16 PM

Originally Posted by onegreenray

i was running 2 turnigy 3 s 40c 5000mah on a octura 642 with a castle 1512 1.5y.i have been trying for two days to figure out what i did wrong.

The numbers look right. I've run that RPM/prop on 4s w/T180. So ya got me.

**scullyeng** · 10-25-2010, 08:25 PM

Originally Posted by onegreenray

i was running 2 turnigy 3 s 40c 5000mah on a octura 642 with a castle 1512 1.5y.i have been trying for two days to figure out what i did wrong.

Were you using the Bec on the t-180?

**FighterCat57** · 10-25-2010, 09:36 PM

Originally Posted by scullyeng

Were you using the Bec on the t-180?

Oh yeah, forgot to ask! How is it fried? The T180 is known for losing it's BEC. It may just be the BEC died.

**onegreenray** · 10-25-2010, 10:32 PM

oh no it melted completely. i didn't remove the bec. could that have been it?

**FighterCat57** · 10-25-2010, 10:39 PM

Originally Posted by onegreenray

oh no it melted completely. i didn't remove the bec. could that have been it?

Dunno. I just heard about two other's melting on 6s though...

**onegreenray** · 10-25-2010, 10:40 PM

that's whats bugging me. so figure I'll give this new one Steve is getting a try. i would rather buy from him anyway.

**Rumdog** · 10-25-2010, 10:54 PM

IME, go for a HV esc to run 6s safely. With the lv esc's you're running at max capacity for voltage. I have a stinky Seaking 180 to prove it as well.

**onegreenray** · 10-25-2010, 10:57 PM

rumdog,

still new at this which hv do you recommend?

**Alexgar** · 10-26-2010, 01:22 AM

whats the sticker on these esc's

**Steven Vaccaro** · 10-26-2010, 07:07 AM

Originally Posted by Insaniac

Which ESC?

The program card in the picture is the Airplane model and she said will not work with the swordfish.

**ray schrauwen** · 10-26-2010, 08:54 AM

mail call!

**bigwaveohs** · 10-26-2010, 11:59 AM

Originally Posted by Steven Vaccaro

Not sure if that one will work. Its not available to me from Hifei as far as I know, but will ask.

200's are in a box in customs. I should have them tomorrow!

Would this programmer work?