If this is your first visit, be sure to check out the FAQ by clicking the link above. To post questions and to view pictures, you will have to register by clicking here register : Important, Please make sure to add oseforum@offshoreelectrics.com to your safe senders email list. Otherwise the activation email may go in your spam box. Or to start viewing/reading the forum without having to register, select the forum that you want to visit from the selection below.

Welcome to The OffshoreElectrics (OSE) RC Electric Boating Forum!

Please take a moment to read this. OSE is a tight knit community of like minded rc boating enthusiasts who value "on topic" and clean discussions. You are currently viewing our forum as a "guest". A guest will not be able to post questions or view pictures and videos.

Registration is fast, simple and absolutely free. Please click here to Join now.

By joining our free community you will have access to post topics, create your own image gallery to share with everyone, communicate privately with other members (PM), respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us by clicking here.

Results 1 to 4 of 4

Thread: Small Couplers

Thread Tools
- Show Printable Version
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

08-30-2010, 01:32 AM #1
SweetAccord

View Profile

View Forum Posts

Private Message

Speed Passion
Join Date

Oct 2007

Location

CA

Posts

1,302
Small Couplers

Greetings,

I'm looking for a motor coupler/collet for a 20x40mm motor. I don't want anything that would use a set screw on the wire drive. A grub screw on the motor shaft side is fine but not preferred. Here is what I'm looking for.

Specs: Motor shaft is 2 mm (screw or compression type is fine) and on the flex drive cable side must be compression type collet that is .098 or .094. Does anyone know where one may be purchased or who may make this?

Thank you in advance.

Last edited by SweetAccord; 08-31-2010 at 07:08 PM.

Reply With Quote