Page 1 of 8 123 ... LastLast
Results 1 to 30 of 228

Thread: www.mlboatworksrc.com Laser cut race boat kits & accessories

  1. #1
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default www.mlboatworksrc.com Laser cut race boat kits & accessories

    Check out my website for all that ML Boatworks offers. Laser cut, birch plywood frame kits for the following :

    Scale hydroplane kits in many different sizes
    Outboard tunnel hulls/ kits
    Sport hydroplane hulls/ kits
    Wild Thing Mono's
    Custom boat stands and many other new designs in the works!








    Last edited by cybercrxt; 07-24-2014 at 08:34 AM. Reason: updating
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  2. #2
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    1/16th Scale Miss Thriftway:



    1/8th scale 8255 Executone Framing (Build thread in the hydro forum:

    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  3. #3
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    '74 U95 Framing:



    '80 Pay Pak Turbine:



    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  4. #4
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    '67 Bardahl Karelson Hull:




    And the '69 Pay Pak Outrigger hull




    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  5. #5
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    '82 Atlas/ '90 Oberto kit going out to customers:



    My '80 Bud Humpback. You can see the hatch framing, and nosing pieces off to the side for the kit:


    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  6. #6
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    1/10th scale version of the 8255 "'82 Executone" framing kit. Its a nice little hull! You can see the size difference with it vs. the 1/8th scale 8255 in the background. Mike





    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  7. #7
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    '88 Miller High Life/ 88 Circus Circus




    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  8. #8
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    Mike some cool stuff here. Would you like to be added to the Unique products area?
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  9. #9
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Hey Steven,

    I would actually like that. I tried doing that a few weeks ago, but it would not let me and I never got around to contacting you about it. If you want to just move this whole list over, that would be awesome! Thanks, Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  10. #10
    Join Date
    Jul 2010
    Location
    nc
    Posts
    601

    Default

    I really wish youd do some cats.Money is money right?

  11. #11
    Join Date
    Oct 2009
    Location
    UK
    Posts
    370

    Default

    Wow! I've been working on my own design and the CAD side was the easy bit, sitting in-front of my scroll saw was a labour of live and it was lovin' long time!!!!

    I am interested in the T4 though..... can you send me a price?????
    HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one

  12. #12
    Join Date
    Jun 2010
    Location
    VA
    Posts
    815

    Default

    For those that are wondering about the kits I saw Mike Executone and the framed up boat very very very nice his finished boat won best looking boat for the weekend at the IMPBA District 12 race this weekend. I will def own one of his hulls in the future.

  13. #13
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Thanks Jason, sorry if I was not as social as I would have liked to be. I was stressed out over my P-spec tunnel. I had some opportunities to win some heats and let it slip away! You, Kent, Chuck, and Chili are all great guys, and hopefully will help grow the club with FE boats! Talk soon, Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  14. #14
    Join Date
    Jun 2010
    Location
    VA
    Posts
    815

    Default

    you were fine man everyone was going crazy trying to get stuff going. hows that bent skeg lol

  15. #15
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    Mike,
    Any chance the following will be added to the kit list? If so, consider one SOLD!

    Thanks,
    Danny

    U-50 Spirit of the Navy 2008
    171-H
    Master Hull Roster# 96100


    All your boats were simply awesome to see in person.
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  16. #16
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    The skeg actually has the boat running better than ever!

    Danny, I do not have that plan set. If you were wanting that hull, get the plans from Newton, and I can draw them up on CAD! Let me know, Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  17. #17
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    Mike, which sheets will you need?
    171-H

    Also, which hatch would you recommend?
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  18. #18
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Danny, you will need the bulkhead and 3 view sheets for sure, and the paint sheet you will need just cause you will need it! haha. For cowlings, take a look at RCboatcompany.com as they may have one for that kit. I will check as well. Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  19. #19
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  20. #20
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    Tell me where to ship the sheets, and they will be on the way to you.
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  21. #21
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    Oh, and if Manny gets a case of the overwhelmies on the kit he won at the raffle, I'll buy it from him!!
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  22. #22
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    PMing you now, Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  23. #23
    Join Date
    Jun 2010
    Location
    VA
    Posts
    815

    Default

    well Danny if you go with a boat from Mike I guess I will have to jump in in a couple of months. I want a executone like the one he had there this weekend that thing was nice.

  24. #24
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    I just emailed Dick Loeb about the 2 hulls we talked about. I wasn't sure if you called him or not.
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  25. #25
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    New list:

    Finished Framing sets:

    1) 101-A, 6740, ‘67 Bardahl and other “Karelson Hull‘s” 1/8th scale
    2) 105-A, 5560P, ‘55 Thriftway 1/8th,1/10th,1/16th scale
    3) 110-A, 6925, ‘69 Pride of Pay N Pak (Outrigger hull) 1/8th scale
    4) 111-A, 6403, ‘64 Tahoo Miss 1/8th scale
    5) 124-A, 7495, ‘74 U95 Turbine 1/8th scale
    6) 132-A, 8012, ‘79-80 Miss Budweiser Humpback w/ custom hatch framing 1/8th scale
    7) 132-A, 8012, '79-80 Miss Budweiser Humpback modified w/ centered engine well 1/8th scale
    8) 135-A, 8025, ‘80-82 Turbine Pay N Pak 1/8th scale
    9) 135-E, 8410, ‘86 Seven Eleven 1/8th scale
    10) 137-A, 8200, ‘82 Atlas Van Lines (Weiblehaus Sponson Mod) 1/8th scale
    11) 137-L, 8200, ‘90 Turbine Oberto (Weiblehaus Sponson Mod) 1/8th scale
    12) 138-B, 8255, ‘82 Executone , Coors, Oberto, Speedy,etc. 1/8th,1/10th,GAS scale
    13) 146-F, 8700, ‘88 Miller High Life/ Circus- Offset cowling 1/8th scale
    14) 146-F, 8700, ‘88 Miller High Life/ Circus- Cowling adjusted to Center 1/8th scale
    15) 149-B, 8701, ‘87-91 Miss Budweiser 1/8th Scale
    16) 149-C, 8701, ’94 Miss Budweiser U-1 1/8th Scale
    17) 156-D, 8808, ’92 Miss Tide 1/8th Scale
    18) 156-E, 8808, ’97-02 LLUMAR 1/8th Scale 1/8th Scale
    19) 158-A, 8700, ’89-90 Circus Circus 1/8th Scale
    20) 158-D, 8700, ‘94 Smokin Joes 1/8th scale
    21) 158-E, 8401, ’94 Miss Exide 1/8th Scale
    22) 171-D, 9516, ’96 Miss E-lam Plus 1/8th scale
    23) 176-A, 8806, ’91 Miss Madison 1/8th scale
    24) 176-F, 8806, ‘96 Dewalt 1/8th scale

    Plans being worked on in order of Completion (All 1/8th Scale for now):
    1) 106-N, 6207, ‘75 Oberto and MANY others
    2) 172-A, 9601, ‘01 Miss Bud T3 T5 T6
    3) 172-B, 203, ‘04 Vacationville.com, Master Tire
    4) 140-A, 5762, ‘60 Thriftway Too
    5) 147-A, 8501, '85 Bubble Budweiser
    6) 157-A, 8910, ’89 Winston Eagle Lobster
    7) 164-A, 9401, ‘94 Miss Bud T4 (Will also be modifying to make the Peters and May U-37 hull)
    8) 162-B, 9210.5, ‘93 Circus Twin Wing and others
    9) 121-L, 6615, ‘66-68 My Gypsy
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  26. #26
    Join Date
    Aug 2007
    Location
    CA
    Posts
    3,031

    Default

    Quote Originally Posted by cybercrxt View Post

    4) 140-A, 5762, ‘60 Thriftway Too

    6) 157-A, 8910, ’89 Winston Eagle Lobster
    that's what I am talking about...
    :::::::::::::::. It's NEVER fast enough! .:::::::::::::::

  27. #27
    Join Date
    Jun 2010
    Location
    VA
    Posts
    815

    Default

    Mike where does the U-787 fall into the list? Just curious

  28. #28
    Join Date
    Mar 2007
    Location
    VA
    Posts
    7,211

    Default

    It's here:

    22) 171-D, 9516, ’96 Miss E-lam Plus 1/8th scale
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  29. #29
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Yup, what he said! lol
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

  30. #30
    Join Date
    Mar 2009
    Location
    NC
    Posts
    2,908

    Default

    Oh, and I am placing an order today, so if you guys want in, I need the payments! Mike
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

Page 1 of 8 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •