EKOS Video

[Team Jericho]

Here is my EKOS running on 4Ss, Feigao 9XLs, 60 amp Venom ESCs, piano wire shafts from Jeff W., custom cooling, Venom 36mm 3 bladed machined props:

http://www.youtube.com/user/CANADIAN.../0/hVCdcLffUoU

Final hop ups will be Octura 442s and Turnegy 120 Amp ESCs, I think...

[Team Jericho]

Oh yeah, you have to watch through the first minutes of the video, I am after the guy with white nitro hydro :)

[JPriami]

Thanks,
I'd like to see the next vid with the new props.

BTW what did you have your prop angles set at?

[forescott]

Here is a vid of mine on 4s with cf-40's I took today. I either got some radio interference in the middle of the run or I hit a patch of seaweed in the water. It was everywhere today!

[JPriami]

Hell Yeah!

[Diesel6401]

You got that thing running good buddy. What speed you looking at, also are those the 380xl motors?

[forescott]

right around upper 50's on the cf-40's. Yup, 380 9-xl's. wire drives & t-120's. Had to re-config. the electronics to move the lipos in the sponsons and get the c.o.g. forward. It really wanted to blowover with the cf-40's & 442's.

[Diesel6401]

Really nice layout buddy.

[Jeff Wohlt]

She's a screamer! Nice job. Looks like the drives are doing fine.

[Team Jericho]

Sweet...now I know what mine would have been like with the x442s :)

[Team Jericho]

Try going clockwise, 6 laps for IMPBA rules That is why I got Aoxing 5800 4S 30Cs and they fit in the middle when you take out the tray as you have done. 120 Amp ESCs fit perfect back in the sponsons like stock. That being said, a great ride you have there man and I love those intaked in the hull!!

[forescott]

Thanks!! I have a set of 442's and ran it once in the stock config. with batteries in the middle. C.O.G. was too far back. It wanted to blow over @ 50. Putting the lipos in the sponsons in front of the motors brought the cog lower and further forward. Re-tested and got 61 mph, but it was still a little too "loose" for my taste, so I went back to the cf-40's. I like the lipos in the sponsons. It seems to handle much better!

[ctstike]

Thanks!! I have a set of 442's and ran it once in the stock config. with batteries in the middle. C.O.G. was too far back. It wanted to blow over @ 50. Putting the lipos in the sponsons in front of the motors brought the cog lower and further forward. Re-tested and got 61 mph, but it was still a little too "loose" for my taste, so I went back to the cf-40's. I like the lipos in the sponsons. It seems to handle much better!

hey bud were did u find that 442s? cant find it in ose. tnx

[Diesel6401]

hey bud were did u find that 442s? cant find it in ose. tnx

http://www.offshoreelectrics.com/pro...?prod=oct-x442

http://www.offshoreelectrics.com/pro...prod=oct-x442r



*Both require Sharpen & Balance.