Neu Motor Jacket from OSE

[Doug Smock]

Hey Guys,
I'm a little late posting this, been swamped at work.

Casey and I tested Stevens motor jacket last weekend and are happy to say it does a great job with NO leaks.
We tested it on a Neu 1515 1Y on 4s2p in Casey's Titan 40. After 7 laps on a 1/6th mile course the motor came in at a whopping 98'F.
With the Gundert (spelling) jackets under similar conditions the motor was in the 120s.

These jackets are almost as long as the 1515, so on our installations where the motors set all the way down near the bottom of the boat, the jackets will need to pushed all the back to the endbell. This should allow clearance for the jacket.

Great work Steven!! I just placed our order!
Thank you sir!!
Doug and Casey :D

[Eyekandyboats]

Could you tell me the thickness of the water jack
I need to take it into account while building a boat
Thanks.

[properchopper]

Just ordered mine. Yay !!

[Doug Smock]

Could you tell me the thickness of the water jack
I need to take it into account while building a boat
Thanks.

Taylor,
It's tough measuring it in the boat, but it looks like it's 3/16 of an inch minimum.

Doug

[Darin Jordan]

I think the OD is around 1.9"...

[Steven Vaccaro]

Its listed on the details page.
http://www.offshoreelectrics.com/pro...od=ham-neu2.25

[Eyekandyboats]

Thanks guys!