like it says...my motor is 1/8" and the shaft I need to couple to is 2.3mm
any ideas?
like it says...my motor is 1/8" and the shaft I need to couple to is 2.3mm
any ideas?
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures Society
Nick,
Try Ned Schmidt here on the forums. He made a couple for me a few years back when I was building micros.
Take care,
John
"When too much is just right!"
Sorry Nick, he's listed under N.H. Schmidt.
Tell the old buzzard I said hi!
John
"When too much is just right!"
I will make you one. Aluminum, tapped for 6-32 set screws, two per end opposed to each other (thru tapped), you want 5/16 or 1/2" aluminum?
I need OAL and how deep the larger diameter needs to be. I think I can make it Monday, might be tuesday and I will mail it out to you.
I just made one on Friday, .093 flex to 2.26mm motor (2632 mystery)
what do you have with a 2.3mm shaft that is not the motor?
Brian
sorry wrong size
"Our society strives to avoid any possibility of offending anyone except God.
Billy Graham
Bookmarks