Page 2 of 3 FirstFirst 123 LastLast
Results 31 to 60 of 64

Thread: Geico "In Stock" date

  1. #31
    Join Date
    Jul 2010
    Location
    MI
    Posts
    3,663

    Default

    Quote Originally Posted by AndyKunz View Post
    I'd ignore it because I know it's wrong. Sometimes bad data gets entered into computers. You'll see...

    Andy
    Andy do I have to have the new DX3S to "bind and drive" with the included rx? Any less expensive tx's I can use? I still use my old banged up DX2. I would like to upgrade my receivers to the marine versions but rx's + a DX3S is a pretty heavy bill

  2. #32
    Join Date
    Sep 2008
    Location
    IL
    Posts
    1,435

    Default

    Hi Keith,

    If your DX2 has a boat logo on it near the car, then you can use your existing tx. If it doesn't you need to change either the rx or the tx. I strongly recommend you get a Marine-compatible transmitter so that you can use it on the water reliably. The Marine radios have a long antenna lead, but only the last inch or so is "active" antenna - the rest is just a cable to allow you to position it properly.

    You don't need to change your receivers if you get the DX3S. It still works just fine with the SR-type receivers. It supports both Marine and Surface protocols.

    Andy
    Spektrum Development Team

  3. #33
    Join Date
    Apr 2007
    Location
    WA
    Posts
    8,335

    Default

    Guys... if you want a less expensive, but equally as effective, Spektrum radio setup, look into the DX3E as well. Not all the bells and whistles of the DX3S, but nicely priced and same performance.
    Darin E. Jordan - Renton, WA
    "Self-proclaimed skill-less leader in the hobby."

  4. #34
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    Quote Originally Posted by AndyKunz View Post
    Hi Keith,

    The Marine radios have a long antenna lead, but only the last inch or so is "active" antenna - the rest is just a cable to allow you to position it properly.


    Andy
    Just to clarify,
    1. can the unused wire be coiled and tie wrapped inside the hull?
    2. how high does the last inch or so have to extend? Is higher better?
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  5. #35
    Join Date
    Sep 2008
    Location
    IL
    Posts
    1,435

    Default

    The unused wire can be coiled, but NO SMALLER THAN 2" DIA COIL! Otherwise it breaks internally and it's not fun (especially in an airplane, don't ask how).

    The higher the better for the active portion. We made the antenna as long as we did because I needed it that long for my Sport and rigger hulls to get it out. Also, it works best when that portion is vertical.

    Andy
    Spektrum Development Team

  6. #36
    Join Date
    Sep 2008
    Location
    IL
    Posts
    1,435

    Default

    GEICO IS SHIPPING!

    It will take a few days to get them all out, but they started leaving the warehouse yesterday I was told.

    Andy
    Spektrum Development Team

  7. #37
    Join Date
    Dec 2009
    Location
    la
    Posts
    1,078

    Default

    Nice!
    Catching Air!

  8. #38

    Default

    horizon says item coming soon.. about to place my order...

  9. #39
    Join Date
    Apr 2008
    Location
    LA
    Posts
    1,510

    Default

    I have one on order @ LHS!!! I cant wait.
    * BBY Lift Master RIgger * Insane Gen 2 Cat * Aeromarine Avenger Pro Twin * Delta Force Cyber Storm * Delta Force 41" Mono * H&M Viper II * H&M Intruder * OSE Raider Hydro * Whiplash 20 * Brushless Mini Rio *

  10. #40
    Join Date
    Mar 2009
    Location
    MI
    Posts
    6,453

    Default

    Quote Originally Posted by AndyKunz View Post
    GEICO IS SHIPPING!

    It will take a few days to get them all out, but they started leaving the warehouse yesterday I was told.

    Andy
    Swwet! What about the Stiletto?

  11. #41

    Default

    Your order was submitted 8/25/2010 7:45:36 PM


    Ugh just blew that money right before school..... god help me

  12. #42
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Default

    Quote Originally Posted by AndyKunz View Post
    GEICO IS SHIPPING!

    It will take a few days to get them all out, but they started leaving the warehouse yesterday I was told.

    Andy
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  13. #43
    Join Date
    Jul 2010
    Location
    az
    Posts
    29

    Default

    yessssss!!!!!
    now i almost wish i didnt buy the ul-1 im going to be on new boat overload

  14. #44
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Default

    Quote Originally Posted by jnation89 View Post
    yessssss!!!!!
    now i almost wish i didnt buy the ul-1 im going to be on new boat overload
    The UL-1 is cool, trust me
    and get this cat to have even more fun
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  15. #45

    Default

    you guys are bad influences... according to you every boat is a good boat... that's way I've purchased 4 boats during this summer.... and now 5 after this baby comes in. how addicted am I already?

  16. #46
    Join Date
    Jul 2010
    Location
    az
    Posts
    29

    Default

    Quote Originally Posted by Brushless55 View Post
    The UL-1 is cool, trust me
    and get this cat to have even more fun
    ohh i know i love the ul-1....the first boat i bought was the supervee about 4months ago....but the ul-1 blows it away....now i hoping the miss g will be even better. plus you can neever have too many boats.

  17. #47
    Join Date
    Jul 2010
    Location
    az
    Posts
    29

    Default

    officially instock at ose yayyy

  18. #48
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    Quote Originally Posted by jnation89 View Post
    officially instock at ose yayyy
    I have confirmation that they are on their way.

    $15 discount to active forum members that have been active since 8/20/2010. Please include your user name on the order form. We will look up the your real name that you registered on the forum with to cross with the name on the boat order, then refund the $15.00.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  19. #49

    Default

    Steve what is your shipping cost to 06255? (I've never ordered anything from OSE before)

  20. #50
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    For UPS its between 15-20 or so. If you want an exact, there is a shipping estimator when you start to check out, but before handing over a credit card.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  21. #51

    Default

    just noticed that thanks

  22. #52
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Default

    Quote Originally Posted by jnation89 View Post
    ohh i know i love the ul-1....the first boat i bought was the supervee about 4months ago....but the ul-1 blows it away....now i hoping the miss g will be even better. plus you can never have too many boats.:cool2:
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  23. #53
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    Quote Originally Posted by jnation89 View Post
    yessssss!!!!!
    now i almost wish i didnt buy the ul-1 im going to be on new boat overload
    I don't know how this is possible??
    "Look good doin' it"
    See the fleet

  24. #54
    Join Date
    Apr 2009
    Location
    la
    Posts
    2,330

    Lightbulb

    MINE WILL BE HERE TUESDAY !!!!!!!!!!!

    THUNDER TIGER OUTLAW,THUNDER TIGER BANDIT
    CARBON FIBER MINICAT HYDRO,MINICAT HYDRO,PROBOAT MISS GEICO,SKUNKWORKS 32" CAT TWIN, H@M VIPER TURBINE ---JEFF WOHLT WIRE DRIVES

  25. #55
    Join Date
    Apr 2007
    Location
    WA
    Posts
    8,335

    Default

    Sounds like you guys may have yours before I do... Hope you all like it!
    Darin E. Jordan - Renton, WA
    "Self-proclaimed skill-less leader in the hobby."

  26. #56
    Join Date
    Apr 2008
    Location
    LA
    Posts
    1,510

    Default

    Mine should be in today
    * BBY Lift Master RIgger * Insane Gen 2 Cat * Aeromarine Avenger Pro Twin * Delta Force Cyber Storm * Delta Force 41" Mono * H&M Viper II * H&M Intruder * OSE Raider Hydro * Whiplash 20 * Brushless Mini Rio *

  27. #57

    Default

    let me know what props you guys try out

  28. #58
    Join Date
    Mar 2009
    Location
    MI
    Posts
    6,453

    Default

    You get your Geico tth?

  29. #59
    Join Date
    Apr 2008
    Location
    LA
    Posts
    1,510

    Default

    Now the hobbyshop said Monday !!! UPS experienced an exception???
    * BBY Lift Master RIgger * Insane Gen 2 Cat * Aeromarine Avenger Pro Twin * Delta Force Cyber Storm * Delta Force 41" Mono * H&M Viper II * H&M Intruder * OSE Raider Hydro * Whiplash 20 * Brushless Mini Rio *

  30. #60
    Join Date
    Mar 2009
    Location
    MI
    Posts
    6,453

    Default

    baaaaahhh!

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •