Looking to buy EKOS

[Bug777]

I removed the motors tonight to get the hull ready for the new one's when they arrive. I ended up cutting down an Allen Key so that i was able to get more turn on the bolts.

These would have to be the worst bolts to get out. It took me 1hr to take out 4 bolts.

[Bug777]

Will this stuffing tube fit the EKOS?
http://www.offshoreelectrics.com/pro...=oct-oc130t-24
Will this coupler do for the motor to flex?
http://www.offshoreelectrics.com/pro...oct-ocfhe4mm13

[silvermansteve]

me too, i'd like to know about this.

[Bug777]

Can anyone help?

[Bug777]

If I recall correctly stock ekos motors had an odd size motor shaft. I had to change mine out. Be sure they slide on snug with no wiggle room or they will cause vibration and you'll lose speed and motor screws. Good luck!!

My motors arrived today. Thanks Steve. But i placed an order for the couplings about 1hr before they arrived. I tried the standard couplings & they fit perfectly. I have since found that the standard motors have the same size shaft as the leopards.