Results 1 to 24 of 24

Thread: New Turnigy Digital Charger Balancer

  1. #1
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default New Turnigy Digital Charger Balancer

    I just got one of the new Turnigy chargers and tested out on my new 2 x 4S Turnigy LiPo's. Works great, easy to use and has great digital display.
    On the negative side, cooling fan is a little noisy but it sure moves the air very well inside of it.
    Anybody else has one and would like to share their opinion?
    Thanks
    Robert
    Attached Images Attached Images
    DJI Drone Advanced Pilot
    Canada

  2. #2
    Join Date
    Aug 2007
    Location
    ON
    Posts
    693

    Default

    If you have a big enough power supply can you charge 4 4S lipos at 5 amps each ??

  3. #3
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Next time I will plug 4 x 4s and let you know.
    I think 4 x 4s woul charge at 3Amp
    Robert



    Quote Originally Posted by eboat View Post
    If you have a big enough power supply can you charge 4 4S lipos at 5 amps each ??
    DJI Drone Advanced Pilot
    Canada

  4. #4
    Join Date
    Apr 2007
    Location
    Wa
    Posts
    5,905

    Default

    How acurate is it and what voltage is it charging to?

    Jim
    "Our society strives to avoid any possibility of offending anyone except God.
    Billy Graham

  5. #5
    Join Date
    Jun 2008
    Location
    Co
    Posts
    509

    Default

    Should charge all 4 packs at 3.4 amps. I only have 2s packs so the 3.4 amps is from what others have claimed. It's just 4 smaller charges built into one box. They all work seperate from each other. I have charged all 6 of my packs at 6 amps although I only got the one balance adapter. So if you buy one please remember to get a few more.

    On the first go around the balancer was dead nuts. 6 packs all came in from 4.19 to 4.20. Verified using my voltmeter.

    That fan does make some noise.

    Over all in the very short time I have owned it's been perfect. Who knows on longevity.

  6. #6
    Join Date
    Mar 2008
    Location
    So
    Posts
    1,006

    Default

    It's only 50watts per channel, which limits it to about 3.4amps per 4s pack.
    My prop hasn't been wet in a while.

  7. #7
    Join Date
    Aug 2007
    Location
    ON
    Posts
    693

    Default

    Quote Originally Posted by calcagno45 View Post
    It's only 50watts per channel, which limits it to about 3.4amps per 4s pack.
    That is what is was wondering about
    Looks like a good charger but to try and charge the 5000 packs will take longer when you can only go to 3.5 instead of 5 amps

  8. #8
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    ...right, but you charging 4 on the same time!!! Or 4 diferent ones on the same time wthat would not be possible with single or duo charger....
    I made one mod to my charger and cut the bars on the front of the cooling fan. It moves air much easier and I can feel better air flow now....
    Charging 2 4S LiPos this pappy is not even getting worm but extra air flow allways helps...
    I love this charger!!!
    After the weekend I will be testing this charger all possible ways. All my LiPos are charged now and I need to drain them out to before my testing. Will update....
    BDW guys!!! This charger is $99.99 for members!!! Regular price is $144.00
    Robert
    Attached Images Attached Images
    DJI Drone Advanced Pilot
    Canada

  9. #9
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    May I please ask how did you figer is 50 Watts per channel?
    Thank You
    Robert



    Quote Originally Posted by calcagno45 View Post
    It's only 50watts per channel, which limits it to about 3.4amps per 4s pack.
    DJI Drone Advanced Pilot
    Canada

  10. #10
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Most of my LiPos are 2S so eureka!!! I can charge 4 of them at 5 Amps!!!



    Quote Originally Posted by eboat View Post
    That is what is was wondering about
    Looks like a good charger but to try and charge the 5000 packs will take longer when you can only go to 3.5 instead of 5 amps
    DJI Drone Advanced Pilot
    Canada

  11. #11
    Join Date
    Mar 2009
    Location
    AZ
    Posts
    1,320

    Default

    50w per channel is listed in the specs, i only have mostly 2s packs too-so ive had my eye on this one as well.

  12. #12
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    ...got it...
    DJI Drone Advanced Pilot
    Canada

  13. #13
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default Test Charge # 1 ( New Turnigy 4 x 6S charger )

    Test Charge # 1
    4 x 2S, 5000mAh, 20-30C, 7.4V charging at 5 Amp on the same time. Works fine.
    Charger after 6 minutes only got worm. So fare so good...
    Next will be to see 4 x 4S batts....
    Will post...
    Robert

    Charging of 4 bateries done in 60 minutes!!!
    Attached Images Attached Images
    Last edited by LiPo Power; 05-25-2010 at 10:49 AM.
    DJI Drone Advanced Pilot
    Canada

  14. #14
    Join Date
    Jul 2008
    Location
    VA
    Posts
    3,225

    Default

    That's definitely not something I would leave unattended! I'm glad to hear it's working well for you.
    IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

    MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

  15. #15
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    My charging is allways done under close supervision....





    Quote Originally Posted by Meniscus View Post
    That's definitely not something I would leave unattended! I'm glad to hear it's working well for you.
    DJI Drone Advanced Pilot
    Canada

  16. #16
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default Charging test #2 ( 4 x 4s, 40-50C, 14.4V, 5000mAh )

    Well, works great!
    Charging at 3,5 Amp each.
    I will check time of charging at the end of it and post.
    Robert

    First 2 batterias were done after 40 minutes and second set 57 minutes.
    Within 1 hour I had 4 4S lipos charged!!!! Great staff....
    Attached Images Attached Images
    Last edited by LiPo Power; 05-26-2010 at 10:47 AM.
    DJI Drone Advanced Pilot
    Canada

  17. #17
    Join Date
    Sep 2007
    Location
    Co
    Posts
    3,915

    Default

    Quote Originally Posted by LiPo Power View Post
    Well, works great!
    Charging at 3,5 Amp each.
    I will check time of charging at the end of it and post.
    Robert

    First 2 batterias were done after 40 minutes and second set 57 minutes.
    Within 1 hour I had 4 4S lipos charged!!!! Great staff....
    So what power supply did you use?
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing

  18. #18
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    This one. Great Power Supply and on 4 x 4S LiPo charging only got a little worm and cooling fan never kicked in.....
    Robert






    Quote Originally Posted by RandyatBBY View Post
    So what power supply did you use?
    Attached Images Attached Images
    DJI Drone Advanced Pilot
    Canada

  19. #19
    Join Date
    Aug 2010
    Location
    IN
    Posts
    2

    Default

    I bought one of these earlier this summer and regularly charge 4 - 2S 40C 5000mah at the same time. I converted an old computer power supply that will put out 24A @ 12V. I have no complaints, it is a great charger.. Just my .02...

  20. #20
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Same here.... I use my PC 30Amp power supply often as back up or if charging 1 battery...






    Quote Originally Posted by Sailfish View Post
    I bought one of these earlier this summer and regularly charge 4 - 2S 40C 5000mah at the same time. I converted an old computer power supply that will put out 24A @ 12V. I have no complaints, it is a great charger.. Just my .02...
    Attached Images Attached Images
    DJI Drone Advanced Pilot
    Canada

  21. #21
    Join Date
    Apr 2007
    Location
    Wa
    Posts
    5,905

    Default

    Where did you get this supply?

    Quote Originally Posted by LiPo Power View Post
    This one. Great Power Supply and on 4 x 4S LiPo charging only got a little worm and cooling fan never kicked in.....
    Robert
    "Our society strives to avoid any possibility of offending anyone except God.
    Billy Graham

  22. #22
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Which one Jim?
    DJI Drone Advanced Pilot
    Canada

  23. #23
    Join Date
    Apr 2007
    Location
    Wa
    Posts
    5,905

    Default

    Post 18
    "Our society strives to avoid any possibility of offending anyone except God.
    Billy Graham

  24. #24
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Sent PM
    DJI Drone Advanced Pilot
    Canada

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •