Lost prop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mari
    Junior Member
    • Nov 2009
    • 3

    #1

    Lost prop

    Hallo. I have lost on the water my Octura x642 b/s. I don't used glue or anything to fixing the prop bullet nut. Can anybody tell me what's best for fixing the prop bullet nut before I'll lost another one octura for 37 bucks. Thanks and nice day.
  • egneg
    Fast Electric Addict!
    • Feb 2008
    • 4670

    #2
    Loctite thread locker.

    http://www.amazon.com/Loctite-Thread.../dp/B0015PI75E
    IMPBA 20481S D-12

    Comment

    • mari
      Junior Member
      • Nov 2009
      • 3

      #3
      Thanks, i will try it. I don“t know how is it possible, the bullet nut was tight very hard. For the next time i will always use the threadlocker and i will see.

      Comment

      • G-UNIT
        Senior Member
        • Nov 2009
        • 949

        #4
        On my setup I have the regular prop nut on it then the bullet prop nut on after that,
        tighten thr regular nut up against the the bullet prop nut, it acts like a jam nut.
        loctite in addition can't hurt eather.

        Comment

        • mittens
          Junior Member
          • Sep 2014
          • 8

          #5
          What is the thread for the stock drive? 3mm or 4mm?
          ProBoat Blackjack 26, Octora X642 prop (Sharpened and balanced by OSE), Removed Battery Trays & Styrofoam to Add pool noodles making battery slots in the bottom of the sponsons and float whole boat full of water, stock out-drive, 2-(5000MaH, 2S, 30C's)

          Comment

          Working...