Results 1 to 5 of 5

Thread: Lost prop

  1. #1
    Join Date
    Nov 2009
    Location
    CZ
    Posts
    3

    Default Lost prop

    Hallo. I have lost on the water my Octura x642 b/s. I don't used glue or anything to fixing the prop bullet nut. Can anybody tell me what's best for fixing the prop bullet nut before I'll lost another one octura for 37 bucks. Thanks and nice day.

  2. #2
    Join Date
    Feb 2008
    Location
    Va
    Posts
    4,670

    Default

    IMPBA 20481S D-12

  3. #3
    Join Date
    Nov 2009
    Location
    CZ
    Posts
    3

    Default

    Thanks, i will try it. I don´t know how is it possible, the bullet nut was tight very hard. For the next time i will always use the threadlocker and i will see.

  4. #4
    Join Date
    Nov 2009
    Location
    FL
    Posts
    949

    Default

    On my setup I have the regular prop nut on it then the bullet prop nut on after that,
    tighten thr regular nut up against the the bullet prop nut, it acts like a jam nut.
    loctite in addition can't hurt eather.

  5. #5
    Join Date
    Sep 2014
    Location
    AL
    Posts
    8

    Default

    What is the thread for the stock drive? 3mm or 4mm?
    ProBoat Blackjack 26, Octora X642 prop (Sharpened and balanced by OSE), Removed Battery Trays & Styrofoam to Add pool noodles making battery slots in the bottom of the sponsons and float whole boat full of water, stock out-drive, 2-(5000MaH, 2S, 30C's)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •