Hobby city has a new charger listed .
http://hobbyking.com/hobbyking/store...dproduct=11170
Hobby city has a new charger listed .
http://hobbyking.com/hobbyking/store...dproduct=11170
I wonder how accurate the ratings are? 6S at 6amps x 4 charging ports would be over 500 watts for the charger. I dont see a fan or some large cooling ports for ventilation so I am a bit doubtful of the rating. 24 amps in such a small package could generate some heat.
John
Change is the one Constant
I like my Turnigy charger!
this is a great charger!
http://www.hobbypartz.com/thac6smbachw.html
It has a power supply for AC built in. Charger is $55 and shipping only $4.95 and it's here in the states! If something goes wrong it won't cost more to return it than it cost! I've had to throw away stuff from Hobbyking that was defective because it didn't make sense to pay more to return it than it cost. Hobbyking knows this!
Mini Cat Racing USA
www.minicatracingusa.com
...$99.00 that is supercool....
Check this one also:
http://www.hobbycity.com/hobbyking/s...dProduct=10327
DJI Drone Advanced Pilot
Canada
OOOOHH, may be time for an upgrade!
Change is the one Constant
Where does it say 6 amps? Am I missing something?
My friend bought the Hobby King quattro, it looks like a nice charger.
I would guess that's a 50 watt charger per channel, 6A max but only being able to hit that on low cell counts with the current tapering off as the cell count increases, just like my Hyperion 1210s which can do 12s and 10A but being 180watts max not 10A at 12s.
The first review on the Hobby King site the guy wrote down estimated amperage for whatever "s" pack used. I'd guess if it did 6amps a port, it would be strictly on 2s batteries. My turnigy charger (Accucell 6) Slaps in 5a on 2s then drops to 4.3a or so on the 3s batts.
Last edited by blackcat26; 04-17-2010 at 09:31 AM. Reason: spelling as usual....
FE BOATING: Less like a hobby and more like an addiction!
my guess is 6A per port, but if charging 4 6s packs you will only see 1.5A per port for a total of 6A charging
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
I think there basing the output on the input voltage which they have listed as a 12v car battery.
I can't see it, there are so many cloned chinese 50W chargers going cheap that doing anything other than wacking 4 of them in one box wouldnt be worth the R&D costs, and as I have only seen these from china it would actually be there own R&D costs not someone elses that they cloned.
I expect 6A@1s, 6A@2s, 4A@3s, 3A@4s, 2.4A@5s and 2A@6s or thereabouts per port regardless of what the other ports are doing.
I couldn't resist and ordered one last night
And to think I was razzing Doby about having too many chargers...oh well, he does have too many.
Anyone got and used their yet?
Grand River Marine Modellers, el Presidente
IROC VUP, 25" Prince Mono, Mini Hydro, Classic Barrel Back, brushless Mini Rio and two Nitro Tunnels
I ordered a Quattro charger from them last week, just before this one came out!. Oh Well.
It was only a matter of time Happy.....
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Bookmarks