Hi Boaters
Can I charge 2 2S Lipos as 4S on my charger? ( or 3x2s charging as 6S )
Have a look at the picture.
Cheers
Robert
Hi Boaters
Can I charge 2 2S Lipos as 4S on my charger? ( or 3x2s charging as 6S )
Have a look at the picture.
Cheers
Robert
DJI Drone Advanced Pilot
Canada
In theory yes ... but not recommended with out the balance taps.
IMPBA 20481S D-12
it is supposed to be safer to charge them in parallel. one big 2s pack
This is the way to go I think.....
http://hobbyking.com/hobbyking/store...dproduct=11170
DJI Drone Advanced Pilot
Canada
That's right, you missed last season's charging harness build session . They are a great way to charge two packs at the same time.
Grand River Marine Modellers, el Presidente
IROC VUP, 25" Prince Mono, Mini Hydro, Classic Barrel Back, brushless Mini Rio and two Nitro Tunnels
acually H.C. has a 6s splitter balance adapter, plugs into your charger's balace port as a 6s and then splits it to two 3s balance plugs- effectively charges 2 3s packs as one single 6s pack. they need to come out with the 3x2s splitter so i can charge 3 2s packs as a 6s
I'm new so research my advice....
But the picture is of two batteries in series correct? You would want to run them in parallel (w/ a fabricated balance tap of course).
http://www.offshoreelectrics.com/inf...l-parallel.php
- I'm new, and promise to pay forward all help received
heres the link lipo-
http://www.hobbyking.com/hobbyking/s..._3S)6S_w/_XT60
Ok, thank You but I only see one end going to balancer and other to the battery. How do I plug this in to balance 2 lipos ? Sorry but I just got confused...
DJI Drone Advanced Pilot
Canada
theres 2 3s plugs on the other side of that yellow board, you need to have your big power wires together in series to the big deans style plug so your charger see's 22.xx volts
the h.c. one is already wired up and ready for your charger for 1.99, id go that route
Bookmarks