Got my son (11) this boat for Xmas after he saw it on youtube and fell in love with it! We finally got to run it yesterday now that the weather is nice. We ran it with a venom 2S 7.4v 5000mah Lipo. On the first run (lasted about 2min) the porpoising was bad brought it in to adjust and noticed it was full of water?? Drained the water adjusted the strut and sent it back out the porpoising was better after about 5min the prop broke... was able to get back to shore full of water and broken prop!Got it home and ordered a Octura 435 3 for it. I found that the cooling system on the motor was the cause of the water in the boat. Both the nipples on the motor leaked fixed that with a small amount of teflon tape. Then I found the seal around water cooling jacket on the motor was also leaking fixed that with some epoxy.Can't wait for the new prop to come in and run it again!!