Listen, I'm building a mono delta 29 boat. I need some decals...
my site: www.LFSwear.com
I want my own design is that possible?
Listen, I'm building a mono delta 29 boat. I need some decals...
my site: www.LFSwear.com
I want my own design is that possible?
Last edited by dddmx3; 12-19-2010 at 08:48 PM.
After all is said and done, more is said than done.
I don't know how to get you you the orginal art for the Bud' Select race boat, but I am hoping to come up with the digital art to create the decals with. I have a attached a number of pictures of several different RC boats with the same art work.
The boat I am hoping make one of my 30" long boat into a Budweiser Select (Miss Geico) Let me know what you would need from me and if this is possible.
Thank you
Boomer
Yes Sir. I am in the process of painting the hull and will be at a point soon to apply the decals. What can I do to help?? I will send you my email address.
Thank you
Boomer
How much $$$$?
After all is said and done, more is said than done.
The paint work is inclusive of the red and black. The decals will be applied over the finished paint work. The plan would be to apply clear coat to the boat once the decals are in place to protect them.
Thank you
Boomer
Well, I have the bud logo done already, the "select" will be easy. same with the 11. Do you have a rough size for these? I'll post some samples later on, I'm just leaving the office now...
I will measure the areas on the boat and get that info to you.
Thanks again
Boomer
oh wow.. free? niceee...
I'd have to think something up.
I'm going to finish my boat first, then I'll get some of your decals :)
After all is said and done, more is said than done.
Cornel Sir,
Here are the are some dimensions for the boat I am hoping will turn out as well as the ones in the pictures I posted in my previous message.
The hull width is 10 1/2" across
The Miss Geico decal is 12 1/4" long and the hulls width at that point is 2 1/2" from the bottom edge of the sponson to the should of the deck.
The MG decal is 1 1/2" wide
The distance from the rear of the hatch lip to the end of the rudder bracket is
1 3/4" and the distance from the same lip to the end of the transom is 1 1/2"
I will post another picture and measurement of the canopy on the next post.
There is 5 picture limit.
Boomer
Last edited by Boomer; 12-15-2010 at 10:52 AM. Reason: added info
Conrnel
Here is the last of the measurements I thought you would need. If you need more or other measurements just let me know
Thank you
Boomer
The canopy is 7" at the spot where the top of the ruler is. It tapers down a bit ,and gets wider as you look forward.
I have yellow Mean Machine... Any suggestions or anything you already have that would fit it? It's completely BLANK now!
Thanks!
I shure would like a wind shield for a DF26.
Got any decals that would fit a 37" Genesis?
After all is said and done, more is said than done.
Ok guys, just came back from a business trip... will start doing some work.
A reminder: if you want the actual decal, you should either take the graphics I post to a local vinyl shop or contact monojeff (just above). He has the tools and knowledge to do the wraps (looks even better than paint...) and he can also ship a lot cheaper... :P
Boomer, sorry for the delay. See if these look right to you as proportions. The one on the back has to be split to be really visible.
The Budweiser text is done with the original Bud Select font, not the one in the samples you posted. See the difference in the attached.
@ddmx: not yet, but I'm getting a Fightercat Daytona (the same hull) and I'll do something for that...
can you do a 4" cartman, my neighbor is a sign maker and has the goods to cut
If you give me a reference photo, yes. Otherwise it's quite complicated to choose a pose...
Then you have to tell me if you want outline only for a vinyl cut or full color for printing.
can you pm an email i cant post a hi rez here
MonoJeff
Cornel has graciously created the artwork I needed for the decals for my boat. I am sorry if I seem confused about who does what. It must be an age thing, so please bare with me here.
It sounds like you are able to make the actual decals from the proper artwork. If that is correct, can I send the artwork the Cornel ginned up for me? Please let me know and what the tarriff would be for the a set or two of the decals. (Budweiser Select, number 11 and the crown as seen in the pictures in my earlier post.) PM or email me at rharcflash@aol.com
Thank you -
Boomer
Thanks Cornel for the shout out.
I just tried to open the files you sent to Boomer for whatever reason had some issues and the eps file didn't want to open. One thing to do in the future is to make sure no fonts are embedded and change them to curves/outlines to make things easier to open and nothing gets adjusted when opened.
I already had the bud select logos so I just used the jpeg for reference.
Not sure how they were saved but something to keep in mind.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
You're welcome.
I did forget to convert to curves... I'll just try again, it could be ok this time.
Most of the time I use Corel, so I'm not really used to eps format requirements.
ps: the file is quite large, even zipped, so I gave up trying...
No worries like I said I just remade it using the jpeg you made for reference.
Not sure why it was so large but the file type I would recommend giving to people is a pdf with everything converted to outlines. Usually is a bit smaller then a eps file.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
Alright so I made up some designs, tell me if it's possible to make them.
I can send you .eps file of the designs...
Please review the attachments.
After all is said and done, more is said than done.
Bookmarks