What is hot and rocking at BBY

**Shooter** · 11-10-2010, 09:07 PM

Nice touch with the black outline on the green letters! Very nice. Any progress on the Smokin Joe? Thanks!

**RandyatBBY** · 11-10-2010, 09:29 PM

Originally Posted by Shooter

Nice touch with the black outline on the green letters! Very nice. Any progress on the Smokin Joe? Thanks!

I have been painting mostly. Did you see this picture? I just cut off the sponson to be able to machine the front of the hatch opening. I will reglue the sponson after I am happy with the hatch.

I will fill with resin to make a hard machinable shelf.

Uploaded with ImageShack.us

**RandyatBBY** · 11-11-2010, 10:57 AM

I am really like this paint job. I never use green, I guess that is why.

**RandyatBBY** · 11-11-2010, 01:44 PM

TTH I have just finished your Stainless strut. What motor are you going to use? I need to know to build the motor mounts. I would run a 1527 1D on 4S2P. It would be good or oval on that setup and great for SAW with 6S.
I also glued your sponsons yesterday and set the booms

Uploaded with ImageShack.us

**Shooter** · 11-14-2010, 10:48 AM

Nice!!!!

Originally Posted by RandyatBBY

I have been painting mostly. Did you see this picture? I just cut off the sponson to be able to machine the front of the hatch opening. I will reglue the sponson after I am happy with the hatch.

**RandyatBBY** · 11-18-2010, 08:25 PM

I have been trying to get back to the Oval/SAW lift Master. but parts came in to this boat and several customers the last three days.
Little more work done finishing the radio and odds and ends.

Rear view

I got the little emblem done

Uploaded with ImageShack.us

**tth** · 11-19-2010, 08:44 AM

Sorry for the delay in contact Randy. My entire immediate family has been ill.

The motor will be a 1527. Thanks for the pics great job.

**RandyatBBY** · 11-19-2010, 12:58 PM

Originally Posted by tth

Sorry for the delay in contact Randy. My entire immediate family has been ill.

The motor will be a 1527. Thanks for the pics great job.

That is cool, I totally understand. thanks for the info. Hope all your family gets better fast.

**RandyatBBY** · 11-26-2010, 06:20 PM

Just finished this little beauty. My feet are freezing!!!! Winter sucks!

Uploaded with ImageShack.us

**Shooter** · 11-30-2010, 12:59 PM

Cold feet in Cali?? Really? It's funny, I was just talking to a co-worker of mine. He built a new pole barn and is using radiant heat in the floor. A water heater heats the water and it is pumped through tubing in the concrete. Makes it pretty cozy! Especially on your feet!

**BILL OXIDEAN** · 11-30-2010, 04:49 PM

Originally Posted by Shooter

Cold feet in Cali?? Really? It's funny, I was just talking to a co-worker of mine. He built a new pole barn and is using radiant heat in the floor. A water heater heats the water and it is pumped through tubing in the concrete. Makes it pretty cozy! Especially on your feet!

Don't give Naylor any ideas, I'm comin' in this week he's liable to have the whole freakin floor ulled u in his factory installin that stuff.

The guy has low tollerance for extreme cold or heat

**RandyatBBY** · 12-02-2010, 12:54 PM

Originally Posted by BILL OXIDEAN

Don't give Naylor any ideas, I'm comin' in this week he's liable to have the whole freakin floor ulled u in his factory installin that stuff.

The guy has low tollerance for extreme cold or heat

You are correct not under 66 not over 74 is just perfect for me the older I get the narrow it gets. . And I do want that heater in my bathroom at home. In fact it is one of my dreams. But the new 2 car garage is first.

**RandyatBBY** · 12-06-2010, 02:21 PM

Had a friend drop off a new toy. Not sure what I am going to do except add electrics. It is a Fritz's hull, Damon has first dibs if I do not keep it.

Uploaded with ImageShack.us

**RandyatBBY** · 12-07-2010, 04:03 PM

Newest CF/FG hull ready to clean PVA off with cold water and paint.

Uploaded with ImageShack.us

**RandyatBBY** · 12-27-2010, 10:23 PM

I got left alone for a little time and was able to make this motor mount for TTH's rigger.

Uploaded with ImageShack.us

**BILL OXIDEAN** · 12-27-2010, 10:29 PM

Hey Naylor, its time to get goin with your sand buggy..
http://www.youtube.com/watch?v=SQQoFIMrF3E

**JMSCARD** · 12-27-2010, 11:03 PM

Originally Posted by Shooter

Cold feet in Cali?? Really? It's funny, I was just talking to a co-worker of mine. He built a new pole barn and is using radiant heat in the floor. A water heater heats the water and it is pumped through tubing in the concrete. Makes it pretty cozy! Especially on your feet!

Radiant heat is very normal here in Vermont, my home has it throughout... I have tile floors throughout as well to maximize the heat transfer... Works wonders as being 10 below zero tonight it's nice to have warm feet in the morning...

**RandyatBBY** · 12-28-2010, 07:59 PM

Willmer I am waiting on the sand paddles to build my truck.

I wear snow boots to keep my feet warm in the winter and save about $60 bucks a month on heating bills.

I got a little more done on TTH's boat,..... motor rails are in and the stuffing tube is next.
Do you want ceramic bearings on your strut?

Uploaded with ImageShack.us

**tth** · 12-28-2010, 11:36 PM

Originally Posted by RandyatBBY

Willmer I am waiting on the sand paddles to build my truck.

I wear snow boots to keep my feet warm in the winter and save about $60 bucks a month on heating bills.

I got a little more done on TTH's boat,..... motor rails are in and the stuffing tube is next.
Do you want ceramic bearings on your strut?

Uploaded with ImageShack.us

yes sir

**BILL OXIDEAN** · 12-29-2010, 02:50 AM

Look at me! http://www.youtube.com/watch?v=d-mSmmlzXPo

**RandyatBBY** · 12-29-2010, 11:27 AM

Originally Posted by BILL OXIDEAN

Look at me! http://www.youtube.com/watch?v=d-mSmmlzXPo

Looks just like when I was there but not the fun of digging threw your junk boxes.
I should get my paddles today

**BILL OXIDEAN** · 12-29-2010, 11:31 AM

Originally Posted by RandyatBBY

Looks just like when I was there but not the fun of digging threw your junk boxes.
I should get my paddles today

Ken and Darris bought paddles, and they're going the same route as you. resurecting an old stadium truck although I recommend you go with that HPI..

If you guys all run a stadium truck, I'll build up a rustler to hang..

**RandyatBBY** · 12-29-2010, 11:42 AM

Originally Posted by BILL OXIDEAN

Ken and Darris bought paddles, and they're going the same route as you. resurecting an old stadium truck although I recommend you go with that HPI..

If you guys all run a stadium truck, I'll build up a rustler to hang..

I bought two sets of paddles. You wanted one and if I feel like you do not get hear fast enough, I just might fire up the HPI 4WD truck.

I hope the paddles will fit on one of my sets of bead locks, so I do not have to buy anything else.

**BILL OXIDEAN** · 12-29-2010, 11:47 AM

Originally Posted by RandyatBBY

I bought two sets of paddles. You wanted one and if I feel like you do not get hear fast enough, I just might fire up the HPI 4WD truck.

I hope the paddles will fit on one of my sets of bead locks, so I do not have to buy anything else.

If it won't ruin my credibility of asking you to order me a pair throw em on!
I've got a few sets now and if you got the pro-line staggered pattern ones they seem to work the best and more your style of handling.

Dude, with a 3.5 Novak system that sucker will be interesting in the flats..
4wd roost at 60+

**RandyatBBY** · 12-29-2010, 11:52 AM

Originally Posted by BILL OXIDEAN

If it won't ruin my credibility of asking you to order me a pair throw em on!
I've got a few sets now and if you got the pro-line staggered pattern ones they seem to work the best and more your style of handling.

Dude, with a 3.5 Novak system that sucker will be interesting in the flats..
4wd roost at 60+

I do not know what motor I will use, I am not pulling any of my SAW boats apart. I could use a old schultz car ESC and a 5XL hacker. I would not have reverse possably

**properchopper** · 12-29-2010, 12:11 PM

You Guys are killin' me.....Last week the XTM 4WD Sand Rail was on sale at Hobby People for $299 !!!! Had paddles in stock. Live 1/2 mile from beach. I need $$ to build one more boat for AZ. I wont buy the Rail..., I won't...I really musn't....

**RandyatBBY** · 12-29-2010, 12:28 PM

Tony use the junk you have or trade for something. I am just buying tires and sticking them on something I have. but then I do not sell much of my old junkand keep building new stuff. Scratch is ware it is at for me. It is just a little slower to get done.
That XTM Sand rail does sound cool!

Will did you go to RC4WD?

**BILL OXIDEAN** · 12-29-2010, 12:45 PM

Originally Posted by properchopper

You Guys are killin' me.....Last week the XTM 4WD Sand Rail was on sale at Hobby People for $299 !!!! Had paddles in stock. Live 1/2 mile from beach. I need $$ to build one more boat for AZ. I wont buy the Rail..., I won't...I really musn't....

There he is! Tony, you're the main guy I'm tryin to impress with all this.
I turned you on to helis and wasn't steerin ya' wrong, we both had a great race season even after diving head first into 'em. I'm not leadin' you astray with this one either.

We both swore to get XTM's but for now you can use any stadium truck or 2wd buggy and throw sand paddles out back. a 20 dollar upgrade.

Wind storm blew in last night still blowin today and has manicured all the dunes to look like the sahara or Glamis. Suicide hill looks Perfect! I was just now blasting 5-foot airs over the plateau.

**RandyatBBY** · 12-29-2010, 12:52 PM

And I do not have to trailer my Early Bronco to Pismo!

**RandyatBBY** · 12-29-2010, 01:04 PM

Originally Posted by tth

yes sir

Done

Thread: What is hot and rocking at BBY

Thread Tools

Display

Hey Naylor

Bookmarks

Bookmarks

Posting Permissions