What is hot and rocking at BBY

**RandyatBBY** · 10-22-2010, 06:23 PM

Originally Posted by bigwaveohs

Randy,
Good luck at the SAWs...don't ring that bell too much...Proper might not invite you back!
Pete

thanks

**RandyatBBY** · 10-25-2010, 07:34 PM

Back home from the LA SAW's. No problems made it safe and sound.

I had a great time one of my slow weekends Only got the Mini Zephyer up to 55MPH Dam new Spectrum kept going out of range. So I could not get a good run up. I did not have a computer with me and could not set the timing on my 240 either Suck.

But I had a great time other wise. Lots of FE boaters. Thanks Mark Grim for the excellent race.

**RandyatBBY** · 10-26-2010, 04:22 PM

Uploaded with ImageShack.us

**bigwaveohs** · 10-26-2010, 06:26 PM

Sweet...is this going to be available?

**tth** · 10-26-2010, 10:13 PM

Glad to have you back in one piece Randy.

**RandyatBBY** · 10-27-2010, 11:43 AM

Originally Posted by bigwaveohs

Sweet...is this going to be available?

It is a OM26 that I built for a customer. I will build another if asked to.

**RandyatBBY** · 10-27-2010, 11:45 AM

Originally Posted by tth

Glad to have you back in one piece Randy.

Thanks, it all went smooth on the road.

**RandyatBBY** · 10-27-2010, 10:02 PM

Well I have everything done on this boat except water lines and a tie down strap.

Uploaded with ImageShack.us

**RandyatBBY** · 10-29-2010, 09:56 PM

I have been working on new molds or bucks the Smokin Joes and the Scat Cat 27 have been on my table. Hear is the changes that I have dome to the rear of the SC27.

Uploaded with ImageShack.us

**johnf** · 10-29-2010, 09:58 PM

Randy, did you happen to get my pm?

**RandyatBBY** · 10-29-2010, 10:07 PM

Originally Posted by johnf

Randy, did you happen to get my pm?

Yes I did, Sorry I was deep in to this mold I will answer you now.

**johnf** · 10-29-2010, 10:08 PM

Originally Posted by RandyatBBY

Yes I did, Sorry I was deep in to this mold I will answer you now.

No problem bud.

**RandyatBBY** · 10-31-2010, 08:18 PM

I worked today to make up for my fun time at the SAW's. Most of the day was spent on Tracy's boat.

Uploaded with ImageShack.us

**tth** · 10-31-2010, 11:16 PM

thanks for the update Randy she is really starting to take shape now. Lookin great.

**RandyatBBY** · 11-01-2010, 12:00 AM

Originally Posted by tth

thanks for the update Randy she is really starting to take shape now. Lookin great.

This is the hardest Part, next to sanding for paint the rest should go faster. The SAW sponson's are hard too but I need the strut on for them.

**Meniscus** · 11-01-2010, 09:14 PM

Randy, There are so many reasons why this is sweet! A lot of thought and detail went into this design. From traditional approach to employed lessons learned. Elegant execution.

Very nice.

Originally Posted by RandyatBBY

I have been working on new molds or bucks the Smokin Joes and the Scat Cat 27 have been on my table. Hear is the changes that I have dome to the rear of the SC27.

Uploaded with ImageShack.us

**RandyatBBY** · 11-02-2010, 04:30 PM

Originally Posted by Meniscus

Randy, There are so many reasons why this is sweet! A lot of thought and detail went into this design. From traditional approach to employed lessons learned. Elegant execution.

Very nice.

Thanks, that is a real nice coment, makes me all warm and fuzzy!

I can not wait to put micro quads on it!

**RandyatBBY** · 11-03-2010, 06:01 PM

Tracy Hi do you want a water pickup in the rudder or a J tube? I am building the bracket and it is eazy at this point to set up for you.

Hear is a boat I just finished for a friend on the board.

Uploaded with ImageShack.us

**Brushless55** · 11-03-2010, 06:49 PM

Originally Posted by RandyatBBY

Tracy Hi do you want a water pickup in the rudder or a J tube? I am building the bracket and it is eazy at this point to set up for you.

Hear is a boat I just finished for a friend on the board.

Uploaded with ImageShack.us

Bad Ass Randy!

**johnf** · 11-03-2010, 07:14 PM

Originally Posted by Brushless55

Bad Ass Randy!

For sure

**tth** · 11-03-2010, 08:08 PM

Randy I would like to have a J-Tube for the water intake and a solid rudder blade.

Sweet job on the mono.......looks great!!!!

**RandyatBBY** · 11-03-2010, 09:49 PM

Originally Posted by tth

Randy I would like to have a J-Tube for the water intake and a solid rudder blade.

Sweet job on the mono.......looks great!!!!

Thanks

I am in lala land thinking about quads!

**RandyatBBY** · 11-04-2010, 06:21 PM

Well I was talking to a friend and he wants me to build a 60 inch Cat with a Quad setup. We do not have to deal with any organization so we can do what we want. we are going to run 4 10S2P with four 1521 1.5Y pushing four X447 and possibly X457 L and R. It will take a while to get all the parts together. but it will happen.

**RandyatBBY** · 11-05-2010, 03:29 PM

Got a little work done on the bracket, this is the best one to date Tracy.

I did a little work on the hatch opening. I need to remove the sponson to get the other end.

Uploaded with ImageShack.us

**tth** · 11-06-2010, 08:36 PM

Looks very solid Randy.............It'll have to be strong!!!!

**RandyatBBY** · 11-07-2010, 03:51 PM

Well building the correct strut for TTH's boat today I started on it friday around 4 PM and ended up across the street at a Bar-B-Q they had some real tender elk and cold beer. Now finding the parts. I am going to build you stuffing tube with no teflon and oiler and cooling.

Oh Ya this thing will be strong!

**RandyatBBY** · 11-09-2010, 01:22 PM

Finishing up a boat I have been working on for a long time.

Uploaded with ImageShack.us

**Brushless55** · 11-09-2010, 04:55 PM

Looks good Randy!

**RandyatBBY** · 11-09-2010, 08:45 PM

A little more done today, all most done.

Uploaded with ImageShack.us

**RandyatBBY** · 11-10-2010, 05:28 PM

Little more done to it, ready for clear coat.

Uploaded with ImageShack.us

Thread: What is hot and rocking at BBY

Thread Tools

Display

Bookmarks

Bookmarks

Posting Permissions