Is there anything that these things need to run reliably? I was also told the motors were usually hard to start any truth to this?
Is there anything that these things need to run reliably? I was also told the motors were usually hard to start any truth to this?
What I have read is the problems were related to the exhaust flange cracking at the motor. I own the stock hull and hardware, but converted it to electric and its a nice running boat that looks great and has held up well.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
wow what are odds you would be the first one to respond thats exactly what I want to do to mine is a electric conversion. Could you post some pics or a video or even some links to the bl motor and esc and batts to use?
How much money do you have?????????
I'll post some things here tonight when I get home.
Here are the highlites;
Motor, Lehner 3080 12T = $750
Controller, Schultze 40/160= $700
Lipos, 10S2P, $1000.
There are cheaper alternatives though. Shoot me a PM and we can talk.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Would this stuff work?
Motor--http://www.offshoreelectrics.com/pro...trunner+Motors
ESC--http://www.hobbyking.com/hobbyking/s...hless_Boat_ESC
with either two 5s or two 6s in series?
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
If you mean this--http://www.rcuniverse.com/magazine/a...article_id=977
then yes it is.
New RTR's for $350??? You aren't talking about the new venom KOS mono are you?
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
hmmm interesting
Doby will post inside shots.
I found few with his Rio 51 @ 51MPH.....
Great boat and fun to wach..... Never mind driving it....
Robert
DJI Drone Advanced Pilot
Canada
Some Vids
http://s167.photobucket.com/albums/u...=Geulph006.flv
http://www.youtube.com/watch?v=qTc0Uw2QI5g
It shows up a few times in this vid.
http://www.youtube.com/watch?v=y6usb1PLmxU
And in this one;
http://www.youtube.com/watch?v=2r6Md6txApE
Some threads.
https://forums.offshoreelectrics.com/...ad.php?t=10449
https://forums.offshoreelectrics.com/...ead.php?t=4569
That should get you started for now.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
As anti gas as i am,
my personal opinion is that it would be easier/ cheaper for someone to just buy a mod motor. I have seen a zen with 6.7 hp or so for under $300
I dont know if that hull can even handle that power. Brushless would be sweet, but this would be hard, cost lots of money, and too much for someone newer to the hobby.
my .02
It handles the power just fine.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
The littlescreamers motor would work great on 10s and possibly push this hull into the 60s!
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
That motor would rip in this hull but the esc is only rated to 6s so you would need this one and you could run it all on 10s
http://www.hobbyking.com/hobbyking/s..._Brushless_ESC
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
ok thanks again 55
Ive owned one and sent it back cracked exhaust and carb problems and btw good luck finding a plug its an oddball i agree on buying a zenoah or maybe even a chung yang but the motor thats in it is junk
Bookmarks