1/8 scale miss elam

[rchippie]

I assume i would still need all the running hardware ?. if true what is a rough estimate of cost for the running hardware ?. I know this one is not as good as a neu . But will it work good on 6s ?.

http://www.offshoreelectrics.com/pro...-580-L&cat=116

[wolf IV]

I have no experience with these motors. Ive heard they are powerful but..? Talk w/ randy (bby racing) on here about his hardware , its around $150.00 from him. He has wire drives , bearinged struts and all sorts of goodies he is who ill be getting my harware from in a few weeks for my 1/8 build. In fact i have a whole set up of hardware coming in the mail right now for another hydro im building that will go up on here real soon!

[Brushless55]

I assume i would still need all the running hardware ?. if true what is a rough estimate of cost for the running hardware ?. I know this one is not as good as a neu . But will it work good on 6s ?.

http://www.offshoreelectrics.com/pro...-580-L&cat=116

If all your looking for is 30-35mph, go with the 580 12L on 6s.
that would be plenty for 35mph runs..

[rchippie]

If all your looking for is 30-35mph, go with the 580 12L on 6s.
that would be plenty for 35mph runs..

That would be plenty . I noticed something . It says 14v after the description 580 12L 1,051 RPM / Volt (14). Is that the max volts or the minimum it can handle ?.

also is this a big enough esc ?. http://www.offshoreelectrics.com/pro...d=cas-hydra120 or would this one be better ?.

http://www.offshoreelectrics.com/pro...d=cas-hydra240

[wolf IV]

That would be plenty . I noticed something . It says 14v after the description 580 12L 1,051 RPM / Volt (14). Is that the max volts or the minimum it can handle ?.

also is this a big enough esc ?. http://www.offshoreelectrics.com/pro...d=cas-hydra120 or would this one be better ?.

http://www.offshoreelectrics.com/pro...d=cas-hydra240

why not a 50 $ hi model?? cool it youself and thats it..

[rchippie]

why not a 50 $ hi model?? cool it youself and thats it..

What is a $50.00 hi model ?.

[wolf IV]

http://www.himodel.com/sort.php?sub1=BP&page=611 th on down the page

[Brushless55]

That would be plenty . I noticed something . It says 14v after the description 580 12L 1,051 RPM / Volt (14). Is that the max volts or the minimum it can handle ?.
also is this a big enough esc ?. http://www.offshoreelectrics.com/pro...d=cas-hydra120 or would this one be better ?.
http://www.offshoreelectrics.com/pro...d=cas-hydra240

those motors are 4s to 8s..
580 12L 1,051 RPM / Volt (14 in stock)
1,051 rpm per volt

[rchippie]

http://www.rcuniverse.com/forum/m_9393765/tm.htm 11 th on down the page

There is no post # 11 on that page . Is this it ?.

http://www.himodel.com/electric/Seak...r_Boat_V2.html

[wolf IV]

There is no post # 11 on that page . Is this it ?.

http://www.himodel.com/electric/Seak...r_Boat_V2.html

corrected it sorry!!!

[rchippie]

corrected it sorry!!!

I dont understand what im looking for .

[wolf IV]

the hi-model esc . 11th one down the page. its 52$

[wolf IV]

http://www.himodel.com/electric/HiMo...-200A-BEC.html

[rchippie]

http://www.himodel.com/electric/HiMo...-200A-BEC.html

Can you run a none water cooled esc safly in a boat ?.

[wolf IV]

Can you run a none water cooled esc safly in a boat ?.

some do a fan ontop, as i ran one today but on a milder setup in my sons super -v. but ( no) is a better way of answering your question. its easy to do. take off the heatsink and add a watercooling plate w/ thermal paste store. re shrink and your done.http://www.offshoreelectrics.com/pro...prod=etti-a044

[rchippie]

some do a fan ontop, as i ran one today but on a milder setup in my sons super -v. but ( no) is a better way of answering your question. its easy to do. take off the heatsink and add a watercooling plate w/ thermal paste store. re shrink and your done.http://www.offshoreelectrics.com/pro...prod=etti-a044

Are all the holes for the hardware all ready driled in the transom ?.

[wolf IV]

yes and back nuts installed i believe under glass as well. same w/ the turn fin and radio box.

[wolf IV]

s o l d !!!

[rchippie]

Payment sent . Is it to late to add insurance ?.

[wolf IV]

call me ......

[mpg43]

rchippie, Thanks for buying this, You just saved me from going into the poorhouse. It looks like it will be a lot of fun! Good luck with it.

Mark

[rchippie]

rchippie, Thanks for buying this, You just saved me from going into the poorhouse. It looks like it will be a lot of fun! Good luck with it.

Mark

.

[wolf IV]

packed and ready to go out tomorrow. spent 2 1/2 hrs wrapping the big girl up! what a pain, but will be all worth the undress upon arival! Oh baby please be a good girl ... its a long trip!!!!

[rchippie]

Dam you were not kidding were you . I will un dress her nice & slow

[Jesse J]

rchippie, Thanks for buying this, You just saved me from going into the poorhouse. It looks like it will be a lot of fun! Good luck with it.

Mark

[wolf IV]

Shipped today , heres the tracking # ! Should be there on wed.

[rchippie]

Shipped today , heres the tracking # ! Should be there on wed.

Thank you very much kind sire . I sent you a gift paypal for the insurance .

[wolf IV]

got it! thankyou, i wrote glass on all sides of the box... well, it is glass( fiberglass).. just let me know when you open it, and be prepaired to clean up some packing

[rchippie]

got it! thankyou, i wrote glass on all sides of the box... well, it is glass( fiberglass).. just let me know when you open it, and be prepaired to clean up some packing

[rchippie]

I recived the miss elam hull from josh today. It was packed very very well . It took me 10 minutes or more just to un wrap it . I would diffinitly deal with josh again .