Originally Posted by
BHChieftain
Hi,
Did a couple of runs with stock setup, plus X642 prop (picture shows a 440/3, but I swapped it out). I'm using the modified trim tabs (dogears) and fins. Boat is still a little unstable on right turns. We are probably going 1/4 to 1/2 throttle on the right turns, but if we start to power out of the corner she'll bounce around quite a bit and we need to back off. Left turns seem smoother.
Check out the tab/fin alignment and let me know if these look ok, or should I try bending the fins even further out (this set of fins/tabs actually came from Jesse's old boat, that way I can return to stock setup easily on this boat).
Thanks,
-Chief
PS, X642 is much better than 440/3 on this boat. No cavitation problems when pulling up to plane.
Generally this boat will be little wigily on right turns. It did this to me also. She is great in left turns but I know I know..... Check on Jesses mods to fix this but stock will just be like that .....
DJI Drone Advanced Pilot
Canada
Bookmarks