Results 1 to 6 of 6

Thread: Fastech, strange battery problem...

  1. #1
    Join Date
    Nov 2008
    Location
    SA
    Posts
    708

    Default Fastech, strange battery problem...

    I persuaded a friend to purchase a Fastech to get into the hobby of FE. He got it. Bought two 4600mah NiMH's and got the LHS to put some Deans on.

    1. Now when he connects them it will only arm the ESC if connected with one particular pack on the left and the other one on the right. Switching the packs on the ESC connector, leads to nothing happening when switching on the ESC... Only one pack drains as well when running...
    Where is the problem, the stock ESC leads or is one batt pack a dud?

    2. What is the fastest, easiest way to remove the shaft for re-lube?

  2. #2
    Join Date
    Oct 2008
    Location
    WA
    Posts
    462

    Default

    Get a voltage meter to see if the one battery is giving any juice. If it has been sitting in the hobby shop for a while you might need to wake up the cells.

  3. #3
    Join Date
    Oct 2009
    Location
    NC
    Posts
    4,204

    Default

    I had a similar problem with my SV with some brand new NIMH batteries. Soon as I would plug one particiluar pack into my cheap charger after like 5ms it would say charged. Put it into the boat and nothing would happen. I had to buy a better charger and everything worked fine after that.
    - Diesel's Youtube
    - Diesel's Fleet
    "It is easier to be wise for others than for ourselves"

  4. #4
    Join Date
    Nov 2009
    Location
    ON
    Posts
    84

    Default

    2. http://www.youtube.com/watch?v=Gupim0o0Coc everything you need to know!

  5. #5
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Quote Originally Posted by Arctic Fire View Post
    2. http://www.youtube.com/watch?v=Gupim0o0Coc everything you need to know!
    cool....
    DJI Drone Pilot
    Canada

  6. #6
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    Quote Originally Posted by lomdel View Post
    I persuaded a friend to purchase a Fastech to get into the hobby of FE. He got it. Bought two 4600mah NiMH's and got the LHS to put some Deans on.

    1. Now when he connects them it will only arm the ESC if connected with one particular pack on the left and the other one on the right. Switching the packs on the ESC connector, leads to nothing happening when switching on the ESC... Only one pack drains as well when running...
    Where is the problem, the stock ESC leads or is one batt pack a dud?

    2. What is the fastest, easiest way to remove the shaft for re-lube?



    1. get programming card

    2. get LiPo's

    DONE!!!!
    DJI Drone Pilot
    Canada

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •