Time to give the Blackjack some attention.

[sfcoffee]

Where& how much for HK lipos

[Dragonturbo3]

I am about to order 4 of these. I believe this is the site mentioned.
http://www.hobbycity.com/hobbyking/s...00mAh_2S1P_40C

[wakeboardfusion]

i bought the hobby city ones that are $18 each. the turnigy hardcase 2s 5000 mah

[sfcoffee]

I paid $100 a piece at Hobby Town..Bend over..

[wakeboardfusion]

did they at least offer you Vaseline, or do they charge for that too?

[wakeboardfusion]

Steven sent me the hardware in a few days. Fast shipping. Thanks! Got the new hardware on, as well as a new boat. DF Vortex. I used the existing top two holes and drilled two new bottom. I also S/B the prop. I give props to those who do it themselves. This was my first time and it took me about 1:15-1:30 to do it.

[wakeboardfusion]

just finished doing the turn fin mod, puting heat shrink on the stuffing tube/strut, and loctighting all the hardware. I sure hope i dont lose this prop!

[wakeboardfusion]

I wish my stuff shipped faster, i bought 2 packages from HK. one registered and one not. The registered shipped 10 days ago and tracking still hasnt updated. Unregistered one shipped 8 days ago. Who knows when that will arrive.

[wakeboardfusion]

Programing the ESC. So if i run 2 2s packs do i set cutoff for 12v (4s)?

[wakeboardfusion]

VIDEO!!!!
Sorry, stationary camera... BOO

http://www.youtube.com/watch?v=pUKn0...eature=channel

http://www.youtube.com/watch?v=921_I...eature=channel

Whenever I watch peoples videos i think, man their boat doesnt look that fast, but as i watch my own, its like slow mo compared to running them in real life.

The new hardware, and cutting and bending the turn fins make a 100% difference in running the boat. It wasnt even fun before

[tiqueman]

Lookin good wake! Much.. MUCH better than stock... maybe I will do the hrdwr mod to mine ... if I keep it.....

[wakeboardfusion]

To be honest i didnt have fun with the stock BJ. It was constantly rolling in the turns and flipping at full throttle. This boat is much better! Now i just need to make it faster. Do people usually put Ammo 2300's in? Or would something like a 9xl work?

[LiPo Power]

To be honest i didnt have fun with the stock BJ. It was constantly rolling in the turns and flipping at full throttle. This boat is much better! Now i just need to make it faster. Do people usually put Ammo 2300's in? Or would something like a 9xl work?

Here is picture of the one I had few months ago. Motor was Feigao 8XL, hydra 180 LV, Fullers Hardware, X642 prop, 2 x 7.4 5000mAh Lipos to get 14.8V, short and band turn fins. This boat was ripping!!! Had to slow down in turns. Make sure to check temps!!!

http://www.youtube.com/watch?v=-G0quurnJQc