Results 1 to 7 of 7

Thread: What is a good prop for the mini rio ?

  1. #1
    Join Date
    May 2009
    Location
    ca
    Posts
    144

    Default What is a good prop for the mini rio ?

    an octura

    x 427

    x 430

    x432

    ???

  2. #2
    Join Date
    Jul 2008
    Location
    va
    Posts
    249

    Default

    what is you setup?

  3. #3
    Join Date
    May 2009
    Location
    ca
    Posts
    144

    Default

    brushless and lipo

  4. #4
    Join Date
    Jul 2008
    Location
    va
    Posts
    249

    Default

    what is the size in mm of the motor and also what is the kv rating?

  5. #5
    Join Date
    May 2009
    Location
    ca
    Posts
    144

    Default

    2600 KV brushless motor
    Specification: Length: 40mm (exclude motor shaft)
    Width: 20mm
    Shaft size: 2.3mm

  6. #6
    Join Date
    Mar 2009
    Location
    MT
    Posts
    261

    Default

    with that size motor I would think the x427 would be best. You could try the x430 but you would have the check the motor temp & esc to make sure you don't burn it up. Also, that size motor won't fit in the motor mounts on the mini rio, but you might be able to shim it someway. It definitly would need to be water cooled too.

  7. #7
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    I just ran mine today with a 3000KV outrunner on 2S with a 432 and it rocked. motor came in at 55deg F...
    "Look good doin' it"
    See the fleet

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •