Hi I am looking for a Cat hull, prefer HOTR, MM, Skunkworks or something that looks close to a mystic c 5000. Must be around 30 inches, any condition, minor damage OK I can fix it. If you can help, let me know.
Thanks
Hi I am looking for a Cat hull, prefer HOTR, MM, Skunkworks or something that looks close to a mystic c 5000. Must be around 30 inches, any condition, minor damage OK I can fix it. If you can help, let me know.
Thanks
Last edited by CircusCircus; 11-29-2009 at 10:57 AM.
R/C Unlimiteds
NAMBA 237
You can get a brand new MM hull from aeromarine for 60 bucks I believe.
dude check out my MM I will let you have the hull and all the hardware including the servo for $200 shipped
thats only $100 more than you want to pay and mine has all CF, .187 flex, all cleaned up inside with 540 motor mount installed
for $25 more look at the cool hatch I will include
https://forums.offshoreelectrics.com/...ad.php?t=11272
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures Society
Not sure. They were nitro boats . I bought one with hardware and it had absolutely no damage.
Hmmmm, intresting. I know these are the nitro versions, but it can converted over to Electric. They dont state shipping charges either, do you remember what they charged you for shipping?
R/C Unlimiteds
NAMBA 237
yes the one I was trying to sell you is one of the water damage hulls
they originally where being sold complete with nitro engine and rx/tx so thats why the "water damage" warning
as far as the hulls I never heard of anyone complaining about water damage...dont forget its a boat...lol
the thing was after the huricains aeromarines basement got flooded and hence the water problem
bottom line there's nothing wrong with them...its the best deal on the planet
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures Society
Thanks Bustitup, I think Ill try my luck and go for it.
Yeah thats funny, they say "water damage" after all its a boat isnt it, thats why I was kind of scared to buy one
Thanks Guys.
R/C Unlimiteds
NAMBA 237
Mean 002.jpg One of these discount hulls worked great for me. Now there is an alternate Mean Machine hatch available too.
SV 27 , Mean Machine, Prince 26,Vac-U-Pickle
Where is there a alternate hatch? Nice looking MM buy the way
R/C Unlimiteds
NAMBA 237
I have a BBY SC 26 still unjoined if you want to build something from scratch.
Cheap
Where is there a link to these $60 MM hulls??? I hear it but, don't see it....???
Nortavlag Bulc
Jeff Im intrested, can you send me a pic, Im not sure what this hull looks likes. I havent pulled the trigger on the MM yet, Im gonna wait till this evening and see if someone else has something, since Aeromarine isnt open now anyway.
R/C Unlimiteds
NAMBA 237
Forget it, found it finally.
Nortavlag Bulc
Last edited by Team FFRB; 11-15-2009 at 03:23 PM. Reason: Info added
HOT RODS ON WATER
Part of the reason I never jumped on the MM was the cowling, I thought it was ugly, but this changes everything Nice work .
R/C Unlimiteds
NAMBA 237
I bought Jeffs BBY scat cat 26, as a project Thanks for a smokin-deal
I came across some Bday-funds, and am looking to see if anyone else has a CAT for sale. I really want a Mystic c5000 hull around 30inches or something that looks similar, but dont know if anyone makes one. Also open to HOTR, and Skunkworks cat. Hull or ARTR is ok too.
Also quick question........What throws-up a bigger rootertail, a inline strut and rudder, or a offset rudder? never used a inline set-up. Im a Hydro guy at heart, but watching some of these videos of Rc Cats with there huge roostertails get my heart racing.
Thanks guys
Last edited by CircusCircus; 11-29-2009 at 10:53 AM.
R/C Unlimiteds
NAMBA 237
You'll get better handling and speed using an offset rudder.
hogwash rummy
check this inline rudder rooster and speed
http://www.youtube.com/watch?v=LgiHZRAMWrQ
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures Society
i have a hotr rtr if interested 10xl, seaking 90 amp speedo, servo, and modified the strut with a 3/16 bearing for standard parts and makes it easy to remove and clean
Im intrested check your pm
R/C Unlimiteds
NAMBA 237
I have a 22" cat with a inline set up and it does good. BUT, the bad thing about the inline set up is, it takes longer to change your prop and to pull the shaft to grease. If your in a hurry they are a pain!
SV27 STOCK, SV27 MODIFIED, H&M VIPER, LAP CAT 27" TUNNEL, TS2, 31 RICO, 22" KEYWEST CAT, RAPTOR AND THERE WILL BE MORE!
Cut 1/2 the threads off the end of the stub shaft.
What brand is the whole flex shaft? Hughey or Octura? one is shorter than the other but, not too short for any prop.
What hardware is it also? I may be wrong...
Nortavlag Bulc
Bookmarks