hey guys,i just got my fastech and wanted to here some helpful ideas of doin some stock tweakin to make the boat perform,handle,and maybe get a little more speed out of it?
any answers?
hey guys,i just got my fastech and wanted to here some helpful ideas of doin some stock tweakin to make the boat perform,handle,and maybe get a little more speed out of it?
any answers?
Have you run it yet?
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
naw will in a few days when i recieve it. i know its kinda dumb to ask the question but i just wanted a few details
DJI Drone Pilot
Canada
Here's a couple things I did to LipoPower's after I bought it from him:
https://forums.offshoreelectrics.com/...ad.php?t=10847
Reckon I should have the thread moved here...
"Look good doin' it"
See the fleet
http://www.hobbycity.com/hobbycity/s...idproduct=9172
http://www.hobbycity.com/hobbycity/s...idProduct=9514
which one would be better?
would the 30c be alot better then 20c?
any other packs recomended?
with that motor I doubt you would EVER notice the difference. That motor sips on the batts, very low amperage draw. I am super duper happy with my 20C $25 Rhino batts from hobbyking.
"Look good doin' it"
See the fleet
is yours the 4900mah?
could i ever run a single 4s if i made a special connector that leads to one plug?
so if i go two of the 20c, it wouldnt be a diff. from the two 30c batteries since the motor doesnt take much of the batt.
anyone? respond?
I would use two 4S in parallel, you need the weight since you are using lipos - boat was designed for NIMHs and 1 4S is about same weight as 1 6cell pack. I ALWAYS modify the leads coming out of the ESC to one - either deans or 5.5 mm plugs to the batteries. This way if you want to run 1 or 2 you just plug it in or use a Y adapter, respectively.
Mine were 4800 - 5000 mah, not less than 4500mah though.
"Look good doin' it"
See the fleet
ok i got it.. what does parralel mean to is it like the wiring or what?
this is it, read please...
http://www.offshoreelectrics.com/inf...g-batterie.php
DJI Drone Pilot
Canada
i kind of get that. what would you recommend for the fastech?
would one 5s 20c 5000mah work if i i connected a Y connector?
yeah i could. i was just wondering what my options would be.
I have run 5S, but in parallel... you need to balance out the boat. If you go 1 5S where do you put it? This is what I was trying to explain earlier. Why not try 2S x 2 (4S1P) as Robert says and if you want to go higher voltage, swap out one of the 2S for a 3S (of same mah, c rating and preferably brand), this way you have flexibility. When going higher voltage than 4S/12cells, you should probably prop back to 42mm.
"Look good doin' it"
See the fleet
oh ok i got it now. if i did this would i have to change the wiring of anything from series to parallel
...yes you would, check here for details..
http://www.offshoreelectrics.com/inf...g-batterie.php
DJI Drone Pilot
Canada
yeah i saw that u posted that up top. do u have any pics of what it would look like?
actually the diagrams tell the story. Here's what i did:
1) take a big pair of diagonal side cutters and clip the battery wires coming out of the ESC about 2"
2) solder on 5.5 mm bullets (male on the positive and female on the negative - that's my convention)
3) make a parallel adapter - 2 Y adapters. 1 where two males go to one female and the other where two females go to one male.
4) plug in the adapters to the ESC and then batteries to the adapters.
5) give boat a toss and grin big.
"Look good doin' it"
See the fleet
finally got my boat and set it up tonight..YAY!! shipping took for ever. but now i have recieved so much helpful info from you GREAT guys i can strt doing some tweaking. i still wanna run though all stock to see how it is.
make sure to use good tape to seal your hatch and spent some extra time in corners of it, you need to keep your boat dry inside. Oooo, if your boat will be too heavy front, too wet ride, cut the battery trays such a way that you can move your lipos back a little. That will help in tweeking it.... Lovely boat for sure...
We need to see pictures please.....
Robert
DJI Drone Pilot
Canada
thanks for the heads up. i will be going soon i just need to grease the shaft and ill be ready to go!. I was also wondering where i could get a LIPO programming card?
Hi
Just post your request under SWAP SHOP for it and I am sure someone will respond to you with it or here:
http://www.offshoreelectrics.com/pro...prb3311&cat=75
DJI Drone Pilot
Canada
ok thanks..
Hey, I have several and I only need one!! I will ship you one for $15 if interested. they really are the only way to reprogram the ESC
Paypal me tonight and it goes out in tomorrows mail - should be there by TGD for sure. PM me and I give you my addy.
J
"Look good doin' it"
See the fleet
ok thanks. i will let you know when i have the money for that.most likely in a few days. ill buy it if you still have it.
Your name is written on it and it is waiting. It was just hoping somebody would be looking. Not really something that sells unless somebody wants one. Let me know when you want it.
"Look good doin' it"
See the fleet
ohhhhhhh ok. thanks i will let you know in a couple days.
Bookmarks