6s hydro's vs1-fe

[6S HYDRO]

just took 2 first place wins in my ul-1 powered vs1, would have been a sweep but i jumped the start in the first heat. heres some nice action shots

[Jesse J]

congrats man, looks like yours is riding near perfect, eh?

[Doby]

Looks good, cables holding up I assume
Nice spot with flat water to run on

[6S HYDRO]

Yeah you really scared me doby, i thought for sure i would break a cable, so i had gotten two from ray for the race. Fuller was my pit man at the race-so lets just say all my boats ran perfect. Took 2 lso wins too and the last one i was in first and flipped

[Jeff Wohlt]

So what happens when you flip a BL motor into the water? Nothing?

[longballlumber]

So what happens when you flip a BL motor into the water? Nothing?

After every heat spray with WD40, let it drain, then charge up the batteries for the next heat!!!

[Doby]

So what happens when you flip a BL motor into the water? Nothing?

They run submerged just fine

[LiPo Power]

congrats man, looks like yours is riding near perfect, eh?

Jesse, are you Canadian background, ehh?

[LiPo Power]

just took 2 first place wins in my ul-1 powered vs1, would have been a sweep but i jumped the start in the first heat. heres some nice action shots

Great pictures, great boat, great run and great camera. What camera was used?

[Jesse J]

Jesse, are you Canadian background, ehh?

Nope, Oregon born. Just incorporate mannerisms I like from all parts, y'all. I did notice that after about 4 days in Vancouver I started pronouncing things a little different, like proh-ject, instead of prah-ject... I tend to acquire dialect and accents wherever I am at the moment.

[LiPo Power]

Nope, Oregon born. Just incorporate mannerisms I like from all parts, y'all. I did notice that after about 4 days in Vancouver I started pronouncing things a little different, like proh-ject, instead of prah-ject... I tend to acquire dialect and accents wherever I am at the moment.

Roger that, ehhh...

[6S HYDRO]

its a guys camera named dave, i guess it had a $1700.00 lens on it- he said it was more than the camera itself

[LiPo Power]

its a guys camera named dave, i guess it had a 1700 lens on it- he said it was more than the camera itself

Thank You.

[6S HYDRO]

i never do anything to my motors and theyr just fine. but they do dry out quick here in arizona

[Shane_744]

Nice boat. Sounds like a good setup too. I too one day will have a VS1 FE, one day I will.

Did I miss the video link?

[D. Newland]

Paul's boat is as impressive as Dave's camera (not me, another Dave). The lens was 4X the cost of the body, and it zoomed to 400. I just don't remember what make it was.

It was a good club run in Az...we haven't had an organized club run in quite some time now and it's good to have new members in the mix. OPC/LSO ran that day.

[6S HYDRO]

Hey dave, i cant believe theres not a shot with your tunnel in the mix.

[D. Newland]

It's 'cuz I wasn't in the mix! I was somewhere screwing around in lane 12 or something.

[Trini]

May I ask what prop your club members are using on your tunnels?

[6S HYDRO]

im using a secret detongued prop from ray fuller- i dont even know the size

[D. Newland]

Mine is a back cut and de-tongued X442, UL-1 motor on a TS-2 hull. Pat was running an SV27 motor on his, and I'm not sure on the prop.

I've seen X440/3, X537/3, X442 and X445's work very well on the Spec OPC's.

[Trini]

Okay thanks for the info, I've been running the X442 on my VS-1 with UL-1 motor and ESC and having good results. I think I'll stick with that setup.

[properchopper]

Good job, Paul ! I may have to hit the next race in AZ to give you some competition [ I've been using, at Brian's recommendation, a Grim 42/55
de-tounged & mildly cupped with the UL-1 motor ; will try a hub-cut 442 this weekend].