just took 2 first place wins in my ul-1 powered vs1, would have been a sweep but i jumped the start in the first heat. heres some nice action shots
just took 2 first place wins in my ul-1 powered vs1, would have been a sweep but i jumped the start in the first heat. heres some nice action shots
Looks good, cables holding up I assume
Nice spot with flat water to run on
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Yeah you really scared me doby, i thought for sure i would break a cable, so i had gotten two from ray for the race. Fuller was my pit man at the race-so lets just say all my boats ran perfect. Took 2 lso wins too and the last one i was in first and flipped
So what happens when you flip a BL motor into the water? Nothing?
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Nope, Oregon born. Just incorporate mannerisms I like from all parts, y'all. I did notice that after about 4 days in Vancouver I started pronouncing things a little different, like proh-ject, instead of prah-ject... I tend to acquire dialect and accents wherever I am at the moment.
"Look good doin' it"
See the fleet
its a guys camera named dave, i guess it had a $1700.00 lens on it- he said it was more than the camera itself
Last edited by 6S HYDRO; 10-20-2009 at 07:38 PM.
i never do anything to my motors and theyr just fine. but they do dry out quick here in arizona
Nice boat. Sounds like a good setup too. I too one day will have a VS1 FE, one day I will.
Did I miss the video link?
Paul's boat is as impressive as Dave's camera (not me, another Dave). The lens was 4X the cost of the body, and it zoomed to 400. I just don't remember what make it was.
It was a good club run in Az...we haven't had an organized club run in quite some time now and it's good to have new members in the mix. OPC/LSO ran that day.
Hey dave, i cant believe theres not a shot with your tunnel in the mix.
It's 'cuz I wasn't in the mix! I was somewhere screwing around in lane 12 or something.
May I ask what prop your club members are using on your tunnels?
Atlanta Model Boaters
District 13
im using a secret detongued prop from ray fuller- i dont even know the size
Mine is a back cut and de-tongued X442, UL-1 motor on a TS-2 hull. Pat was running an SV27 motor on his, and I'm not sure on the prop.
I've seen X440/3, X537/3, X442 and X445's work very well on the Spec OPC's.
Okay thanks for the info, I've been running the X442 on my VS-1 with UL-1 motor and ESC and having good results. I think I'll stick with that setup.
Atlanta Model Boaters
District 13
Good job, Paul ! I may have to hit the next race in AZ to give you some competition [ I've been using, at Brian's recommendation, a Grim 42/55
de-tounged & mildly cupped with the UL-1 motor ; will try a hub-cut 442 this weekend].
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
Bookmarks