STOP ! there ARE Europeans running Neu's !!!
Getting a pair of tenshocks from china still is cheaper for us then buying neu's from the States.
http://www.neumotors.com/Site/Boat_motors.html "Achim Kurrecks ran his HPR 135 cat for the first time on a nice and wide lake. He ran a twin setup of your 2215/1Y on 10s1p LiPo each. "
Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"
You know what they say about Belgians ?
Almost all Belgian racers use tenshock, and lifepo's !!!!
More and more germans get interested in Neu's.
You now even find Neu's to be sold in the German board.
I just sold 4 mounts that fit a 2230 , 2215 , 1527 , and a 1521 to a very nice fellow in Norway.......Joern Markset . I think Neu's are starting to take off over there also
Necessity is the mother of invention.............
Youtube Video's http://www.youtube.com/user/Titanis2000
David may not have seen a Neu but I know he competed against one that was tucked inside a mono1 at the UK nationals when he came over last year.
I figure it's only a matter of time that NEU will dominate in Europe. I keep telling David that he needs to become the European distributor for them.
Mini Cat Racing USA
www.minicatracingusa.com
We cab buy Neu's in Germany.
But their assorti is airplane orientated.
can you post the link Gerwin? Thanks!
Excuse, it's Swiss now
http://www.eflight.ch/shop/USER_ARTI...&kat_aktiv=305
The Germans seem to have stopped selling
So, from my understanding, th unloaded motor RPM is somthing like battery voltage*KV right?
Given this chart
For the 21 turn motor, with a KV=2600, it list max voltage of 32V!!
If im right in my previous assumption...
32*2600 = 83,200 RPM!!!!
Could the possibly be right?
They do call out special bearings as part of he build, but really?
Could his be why they are expensive?
Cheetah, Super Rio, (Mod) Starship (Mod and sold),
That chart is old. The viper line is replacing these. The chart is for the little 20mm motors. I doubt they can handle 82K RPM though. Note is says max watts 500 and max volts 25amps 25. That means a max of 20 volts! Volts x amps = watts.
Mini Cat Racing USA
www.minicatracingusa.com
We will be testing one of the new Viper motors soon. If all goes well, we will sell them in the U.S.A.
Mini Cat Racing USA
www.minicatracingusa.com
About the tenshocks: the rotors don't have any wrapping. The design of the magnet physically holds the magnet in place. I don't know how to clarify this exactly, but the magnet hooks on to the rotor.
Last edited by drkdgglr; 01-26-2011 at 09:14 AM.
We are waiting for Test Results from a boater in Florida. He is testing the bigger 6 pole VIPER motor for us. If results are good, we will begin selling them.
Mini Cat Racing USA
www.minicatracingusa.com
More like sliding a door in a cabinet.
I don't know if the Viper line are assembled like this. But the normal tenshocks are.
Bookmarks