Results 1 to 4 of 4

Thread: Mini C brushless questions

  1. #1
    Join Date
    Aug 2009
    Location
    OH
    Posts
    494

    Default Mini C brushless questions

    So, I want to upgrade a Proboat Mini C to brushless and here are some components I was thinking of using:

    Motor:
    http://www.hobbycity.com/hobbycity/s...idproduct=4201

    ESC:
    http://www.hobbycity.com/hobbycity/s...ies_25-30A_ESC

    Battery:
    http://www.hobbycity.com/hobbycity/s..._30C_Lipo_Pack


    Would these work well together and secondly:

    Would I need to rig a water cooling unit into these components so that they run cool? If so, where can I get a jacket for that motor and for the esc?

    Thirdly:
    I was thinking of upgrading the u joint to metal and keeping the servo the stock. Is this good?

    Thanks

  2. #2
    Join Date
    Sep 2009
    Location
    FL
    Posts
    191

    Default

    Make sure the battery will fit by my rough measurements on my mini c the battery will be too big the hatch wouldn't be able to close fully. Second I would and have already upgrade the servo try the traxxas 2065 waterproof one it fits perfectly but then you will also need a different esc and receiver.

  3. #3
    Join Date
    May 2009
    Location
    ON
    Posts
    3,180

    Default

    I would use water cooled ESC just in case. Maybe higher AMP rating ESC also just in case....
    DJI Drone Pilot
    Canada

  4. #4
    Join Date
    Aug 2009
    Location
    OH
    Posts
    494

    Default

    I already have one of these batteries for my Mini Rio brushless conversion and I will make sure that it works before I get it using my other battery.

    I found one of those servos on ebay so I will have to also look into that and I was planning on water cooling the motor and esc but I don't know how to do the watercooling with the ESC that I showed on here.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •