Ajoda 200 amp esc?

[wolf IV]

http://www.youtube.com/watch?v=b8eE3...e=channel_page ANYONE FAMILIAR W/ THESE?

[Ub Hauled]

it remind me of he Scorpion ones...
nice looking, any info in prices, etc?

[eboat]

That looks just like one of these with the shrink wrap taken off and metal water pipes added for the cooling

http://www.himodel.com/electric/HiMo...200A-OPTO.html

This is mine when I was water proofing it

All the parts and boards look the same

Even using the same heat sink

[Ub Hauled]

is this the HV version Eboat?

[eboat]

This is one of the first ones 3 to7S and I need a receiver battery
I have 2 of these and run them on 2S 4S and 6S with no troubles so far
The one has water cooling and the other has a large heat sink that I was going to use a fan on but never got around to hooking up and it works fine also

[wolf IV]

im not convinced its a hi-model. i have several and have owned over 20 of them. i waterproof mine as well and cool... has anyone heard of " ajoda" 200 amp esc? ub hauled, scorpion? send me a link.

[domwilson]

I think it's a mystery 200a ESC that he re-shrink wrapped. All the others look like mystery's too.

http://cgi.ebay.com/200A-Brushless-M...d=p3286.c0.m14

[domwilson]

The two look very similar....

[Ub Hauled]

http://www.scorpionsystem.com/catalo...d_controllers/

[wolf IV]

http://www.scorpionsystem.com/catalo...d_controllers/

i must be blind... cant find 200 amp.?

[wolf IV]

I think it's a mystery 200a ESC that he re-shrink wrapped. All the others look like mystery's too.

http://cgi.ebay.com/200A-Brushless-M...d=p3286.c0.m14

speeking of wich, how are these? i saw them a while back but didnt ever see them again on flea-bay... plus my hi-models have proven wonderfull...

[wolf IV]

That looks just like one of these with the shrink wrap taken off and metal water pipes added for the cooling

http://www.himodel.com/electric/HiMo...200A-OPTO.html

This is mine when I was water proofing it

All the parts and boards look the same

Even using the same heat sink

well i guess it very well could be a hi- model...? these three look really similar!! i was hoping it might be a new brand to tru out.....

[Gary]

Its not there Wolf. Im blind too? LOL

[wolf IV]

although on second thought look at the cap positioning.. looks more like a mystery..

[wolf IV]

Its not there Wolf. Im blind too? LOL

looked twice

[Ub Hauled]

i must be blind... cant find 200 amp.?

after I looked I could no find it either... oh well...

[wolf IV]

after I looked I could no find it either... oh well...

lol!!! it does look like it could have been one of those as well..

[domwilson]

This may just be some "Art" or "marketing" project that some kid did for school.

[6S HYDRO]

i hope there is some sort of plates in between the boards or else that cooling is a joke

[wolf IV]

i was wondering the same thing!!

[kookie_guy]

i hope there is some sort of plates in between the boards or else that cooling is a joke

lol, good call. it looks like the tubes just go around it. When you catch the angle just right, you can see there is empty space between the tubes and boards. lol

[crabstick]

lol, good call. it looks like the tubes just go around it. When you catch the angle just right, you can see there is empty space between the tubes and boards. lol

HAHA !! Placebo Cooling.

[domwilson]

Actually, it looks like there is a cooling plate.

[6S HYDRO]

then this might be a very effiecient way of cooling the himodel

[ozzie-crawl]

looks to me like they have just cooled the sides

[crabstick]

only real way to find out is pull one apart!!!!!

[Ub Hauled]

take the idea and make an efficient water cooling out of the Himodel

[ozzie-crawl]

i think a good cooling plate on the himodel would be a one piece that covers the top and sides, personally i just use a small fan works very well

[6S HYDRO]

no the problem with the himodel is there is 3 boards if you only cool the top the others get too hot

[Flying Scotsman]

We FE guys are gluttons for punishment. We spy the latest copy out of Asia and go wow, only xxx dollars for an ESC that has not been tested or proven and probably has no warranty or service. I will never purchase one of these no name brands.

Douggie