Well it's better he wears it inside then outside....right?
Well it's better he wears it inside then outside....right?
T, remember that picture of yours you showed me... I do...
here's the inside shot as promised... nothing too different.
:::::::::::::::. It's NEVER fast enough! .:::::::::::::::
Jan, may I ask what hardware you are using, as I have purchased one from Brian and I have never run a shovel design hydro. I will use an SV27 motor and ESC as I already have that power setup.
Thanks,
Douggie
Sure Douggie...
I don't know what hardware it is... I think the strut is Aeromarine, but I am not sure about the rudder and assembly.
I'll take a pic
An SV motor setup right will yield a lot of fun...
Last edited by Ub Hauled; 09-25-2009 at 12:22 PM.
:::::::::::::::. It's NEVER fast enough! .:::::::::::::::
Douggie,
She's on the way. I'll send you a list of parts and setup tips this weekend.
Jan,
That's a speedmaster standard 21 rudder that's cut down.
Brian "Snowman" Buaas
Team Castle Creations
NAMBA FE Chairman
Thanks Brian
:::::::::::::::. It's NEVER fast enough! .:::::::::::::::
Thank YOU ..Brian and Jan
Douggie
That lake is fantastic!!!!!!!!!You guys are lucky!!!
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
I received my Dark Horse Shovel today, now the fun starts. Brian that is the best manufactuered hull I have ever purchased
Douggie
Brian "Snowman" Buaas
Team Castle Creations
NAMBA FE Chairman
OK, with a SV27 motor and ESC, 4S power what would the bald idiot from California and the refinened gentleman from Washington recommend for hardware and cog etc. Tony you are excluded as you are running a piece of foreign crap, unless you say I love American products 1000 times
Douggie
CG at the TE of the sponson to 1/2" behind.
Speed master small round bottom strut and .21 mini rudder.
Strut 3/16" right of center.
Rudder 2" left of strut center line.
Brian "Snowman" Buaas
Team Castle Creations
NAMBA FE Chairman
hey, i got one of the ones from Ray. the only one he built. what are you guy using for strut depth?
Hey Brian,
Your DH shovel holds the IMPBA Q-sport SAWS record as well.
Wonder if I could get 8s into that little hull. LOL
Ken
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
thanks UB
Paul, remember that different props require different strut height settings relative to the lift characteristics of the prop[s].
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
ok, an s220 prather s&b by hyperformance- do you know what mm this prop is?
IIRC, the S220 is comparable to an X645. Maybe even closer to an X545.
The P-220 is 43.689 mm. Great prop, one of my favorites Fast & unloads well .
P-220 : pitch 2.6
X545 : pitch 2.478
X645 : pitch 2.832
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
Thanks Tony and Dave
I gps'd her yesterday in race trim 49.6 mph, and i didnt go out that far
here she is
Lookin' good ! Should stand out in the pack !
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
thanks Tony
Bookmarks