etti 150 manual

[pbleckert972]

i need a etti 150 manual if there is one. have no idea which blue wire goes where and what the extra where is for, that looks like it goes in the reciever, but its only the red and black wire, no white. please help. thanks

[domwilson]

Is this the opto or BEC model?

[pbleckert972]

opto

[domwilson]

You can get manuals here... http://www.himodel.com/search.php?ps...&Submit=Search

[pbleckert972]

thanks. the manual it shows doesnt have the 150 on it. do they all program the same?

[domwilson]

4th item down.
click on that. The page that pops up will have "manual" listed on the upper right hand side.

[pbleckert972]

yeah i know that much lol the manual is for a couple models, i found the rite one on another site. it shows how to program it but what about which blue wire is which?

[domwilson]

If you mean the wires to the motor, hook them up. If the motor spins the wrong way, reverse any two.

[pbleckert972]

yup thats what i meant. and what about the extra wires it comes with that are separate.( red ant white and have a plug on each end that look like they go into a rx?

[domwilson]

Yep. that goes to the receiver. Make sure the red goes to the positive on the receiver. It may only plug in one way. But not always.

[Chilli]

That wire is different than the reciever wire. I forget what it's used for but it's not needed when running your boat.

[domwilson]

I just looked at the pic. The connector that has just the red and black wires, I believe is for the optional power analyzer. Just leave it disconnected and taped up.

[Chilli]

Bingo

[pbleckert972]

I just looked at the pic. The connector that has just the red and black wires, I believe is for the optional power analyzer. Just leave it disconnected and taped up.

thanks guys