Seasons greetings gents, I would love to hear some sources for big 1/4 inch shaft props. :smile:
Printable View
Seasons greetings gents, I would love to hear some sources for big 1/4 inch shaft props. :smile:
VooDoo props are awesome, but they are more for gas boats. Not sure what you are trying to do Bill. I am not sure if they will be able to spin on electrics.
Its a big 6-10s 1/8th scale..Quote:
Originally Posted by sport 40 II
I likely need ones on their smaller end.
Any more suggestions?
The big ABC's are hard to beat if you want to do the prep work.
Oh good. I'm sure ABC has a wide assortment.Quote:
Originally Posted by raptor347
The app is for sport, so I won't have to do much more than clean up and balance them.
Thanks! any other suggestions in perhaps aluminum?
Bill, if you get a hold of VooDoo, they will trim down the aluminum for you for any size.
Bill.
Have you thought about using a 1/4" shaft with the stepdown stub to 3/16" for a greater range of props. That's what I've done with my 1/8 scale hydro. It was cheaper than buying a new set of 1/4" props to test.
http://www.offshoreelectrics.com/pro...?prod=ose-1290
Paul.
I am starting to look ahead at these for my Sniper 45 build as well. How about these....?
http://www.gravesrc.com/category_s/4...search=%20.250
The most viable solution, but I'm afraid its not an option in this appQuote:
Originally Posted by 785boats
are they 1/4 inch?Quote:
Originally Posted by kevinpratt823
Raptor, you probably know the most about props in model boating, so for my personal boat I'll Definitely take your advice.Quote:
Originally Posted by raptor347
That link is after I narrowed down the prop category by searching .250Quote:
Originally Posted by BILL OXIDEAN
As far as I can tell, the ".250" designation refers to 1/4" shaft, as there were several others with the ".187" designation, apparently referring to 3/16".
Nothin' like cheatin' on your homework lol!
Thanks for lettin' me peek at your desk guys : )
I have had great service from this guy: http://www.dasboata.com (chris Hoffman)
Great service and rep. JimsRC and International waters.
Rossi Sales in Florida.
http://www.rossisales.com/index.html
Hi guys, please stop teaching me how to run this big cat. The ARC is a semi proven hull to my knowlege but ya know what, I LIKE IT.
Corners like a hungry fox at Oxidean prop depth
Its hungry and my buddies in the FE community like where Im going with this
Hello Bill
Please check this one too:
http://www.ebay.co.uk/sch/rg_boat_ra...&_trksid=p3686
For the moment, only a very small assortment of products are listed on Ebay.
Rod is a friend of mine and has a lot of quality stuff for Scale & IC. He is a producer not only a seller.
I have asked him about your 1/4" bore prop and he said that it is possible.
But you need to provide more details: brass or alu, what size, how many blades,etc.
He is located in UK but starting next week will start shipping worldwide.You can drop him an email to ask more details.
Regards
Dasbota or voodoo both make great props
Ptrops in stock e mail me if interested dasboata@aol.com thanks chris