Looking to buy 3 sets of piano wire shaft for my EKOS C1 34 inch.
Thanks
Printable View
Looking to buy 3 sets of piano wire shaft for my EKOS C1 34 inch.
Thanks
I have some sets.
The set above the ruler are .078. The ones below are .062.
are the shaft 4mmQuote:
Originally Posted by RayR
how much for the 2 .078
thanks
Those are 3/16th shafts.Quote:
Originally Posted by royalcasa
I do have a pair of 062 to 4mm to 187 (3/16) step shafts. Allows you to use the 4mm struts with standard 3/16 props. they are 16.5 inches long. $30 shipped.
do you have collets for the .062Quote:
Originally Posted by RayR
My collets are in use in another boat. Sorry.Quote:
Originally Posted by royalcasa
I have .062 colletts 21 dollars for all 3 or 8 dollars shipped apeace ...all in good shape but one will need 2 set screws not sure where they got off too all three are for 5mm motor shafts
Attachment 118654
I would like these if you still have them?
062 to 4mm to 187 (3/16) step shafts
Send me PM with paypal shipping to 03269
Quote:
Originally Posted by Big power
PM Sent
PM sent with address
Paypal should be there
Got it. Shipped USPS Priority Mail. Tracking # 9405903699300230510529
All the best,
Ray
I bought some couplers that have a collet for the wire end. I got them here on OSE page. do those hold?
the kind that squeeze the wire byr screwing the end in tighter work great my last one broke off in the collet
I have been using these with great results.Quote:
Originally Posted by Big power
I know this is old but figured I'd try. I picked up a like new EKOS and want to upgrade the collets and shafts.
Boat has the green 2850kv stock motors.
I'm looking to get 2 new prop shafts and upgraded collets, anyone still have anything?