Is the only way to acquire a 1/8 scale hydro to build from kit. Is there any other company’s that sell a completed hull. I’ve seen H&M and have the 1/10 scale.
Attachment 157257Attachment 157258Attachment 157259
Printable View
Is the only way to acquire a 1/8 scale hydro to build from kit. Is there any other company’s that sell a completed hull. I’ve seen H&M and have the 1/10 scale.
Attachment 157257Attachment 157258Attachment 157259
RC boat company makes 1/8 fiberglass and carbon fiber hulls. You would still have to fit them out.
Ok great I’ll look into that. I’m fine finishing a boat out just not building from scratch
If you want to see a RC Boat Co 1/8 project Hull # SG121-Hlook at my build thread. . New 2004 Miss Budweiser T-6 Build This my second hull from RCBC both are all carbon fiber hulls WATCH HIS VIDEOS
Justin, are you still in the dfw area? John is local and he builds a couple different hulls.
https://www.allrc1.com/lone-star-racing-boats
Also read CatBoi's build thread:
https://forums.offshoreelectrics.com...ed-hydro-build
How long in inch's are these 1/8 scale boats ?
Modern pickle forks are around 45 inches + _ , older Round nose hulls are around 47 inches + _ depending on the original design for both styles
my RCBC Sg121h spec.s are
Hull Measurements:
Length 45 " Width 23-1/8" Tunnel 11-1/8"
A.P.L. 26-1/2" Depth 3-1/2" Picklefork Depth 12"
Cockpit Spar 6-3/4"
I was just thinking, Phil Thomas also makes hulls that are around 1/8 scale. Check him out also.
Bob
Thanks .
Beaux.
Hydro & Marine also do some 1/8 scale hulls, if you are still looking for one.
https://www.hydromarine.de/Hulls/Hyd...:130_2_29.html
Thanks, many nice boots at that link.
Depends on what boat you want to build. I have the Velasco molds. Only available in bagged carbon.
Nice looking hull.
Soo I pulled the trigger on a sg 118 from rc boat company. Any cg info on a already running boat would be great. Also looks like everyone is sticking with the neu1527 1.5y for competition sake but if I don’t plan on competing would I still want to stay in the 850kv range and a 4070 size motor?
Attachment 162508Attachment 162509
$800 plus shipping. Shipping is actual cost to where ever it's going. Plan $150 average.