Then copy everything after the "watch?v=".
So in the above example we will use 2pNKBuz1MaQ
Then type the following but use yt instead of xx
[xx]insert what you copied above[/xx]
So in the above example we will have this
[xx]2pNKBuz1MaQ[/xx]
And if all goes right you will see the video below.
11-17-2009, 01:24 PM
Steven Vaccaro
Ok, now I need a cool short rc boat video to use above, instead of that 6 minute one. Anyone have any suggestions?
11-17-2009, 03:10 PM
egneg
Like this?
Edit: Here it is in real time - all 4 seconds!
11-17-2009, 03:21 PM
Steven Vaccaro
Quote:
Originally Posted by egneg
Like this?
I like it, do you happen to have it in full speed? Reason I ask is some new people may think its not working right if they see it in slow motion.
11-17-2009, 05:03 PM
Jeff Wohlt
THANKS, I HAD TRIED THAT AND IT WOULD NOT GO. i WILL REVIEW WHAT i DID. i EMBEEDED IT TO MY SITE AND NO PROBLEMS BUT FIGURED IT WAS BLOCKED FROM HERE. lOOKS LIKE IT WORKS FINE.
Sorry for the caps but not going to retype
11-17-2009, 05:26 PM
RCprince
Your the Man Steve!
11-17-2009, 07:12 PM
Steven Vaccaro
Quote:
Originally Posted by Jeff Wohlt
THANKS, I HAD TRIED THAT AND IT WOULD NOT GO. i WILL REVIEW WHAT i DID. i EMBEEDED IT TO MY SITE AND NO PROBLEMS BUT FIGURED IT WAS BLOCKED FROM HERE. lOOKS LIKE IT WORKS FINE.
Sorry for the caps but not going to retype
Jeff they are two different processes. Take a re-read on how it needs to be done in the forum and you will find its much different than a website.
11-17-2009, 08:35 PM
tth
Thanks for allowing us to use the Embed feature.
11-17-2009, 09:19 PM
Steven Vaccaro
Its really not so much a vb feature, more of a programing change that I didnt know was possible. I thought at first I needed to update the vb forum. But I found some info while surfing on how to allow it. vb forums do all kinds of cool stuff, problem is that its all "Greek" to me. lol
11-17-2009, 09:39 PM
detox
Cool ! Here's my Phil Thomas SS21 first time out. It's running nose heavy. Prop was bouncing a little.
09-02-2010, 01:13 PM
Trea916
miss geico genesis
12-14-2011, 06:55 PM
Brushless55
I don't get how to post having a picture of the video rather than showing a link you need to click on...?
12-14-2011, 07:27 PM
Steven Vaccaro
this is actually old and no longer correct.
Now its easier. Just look at the icons when you post, there is a small one that looks like a old film.
Click it and it will pop open a window with directions.
I don't know what the fuss is all about? Getting a link or getting a picture of the clip is the same thing, who ever wants to watch would have to click, either on the picture or on the link.
First you need to upload to you tube, that's how I did it. Then copy the link and paste it here .
Again, am I missing something as usual?
Your YOUTUBE link doesn't work, try lower case. www.youtube.com
05-30-2013, 11:04 PM
May Liu
Quote:
Originally Posted by tlandauer
I don't know what the fuss is all about? Getting a link or getting a picture of the clip is the same thing, who ever wants to watch would have to click, either on the picture or on the link.
First you need to upload to you tube, that's how I did it. Then copy the link and paste it here .
Again, am I missing something as usual?
Your YOUTUBE link doesn't work, try lower case. www.youtube.com
Hi tlandauer, thanks for your suggestion. I think may be the IP problem, because I typed and copied both link, youtube is restricted here.
05-31-2013, 01:25 AM
tlandauer
I am sorry that you have restriction with YouTube, it is sometimes easy to take freedom for granted. I apologize to you if I came across as being insensitive.
05-31-2013, 01:43 AM
May Liu
Dont be, I appreciate your enthusiasm:thumbup:!
05-31-2013, 01:46 AM
tlandauer
Quote:
Originally Posted by May Liu
Dont be, I appreciate your enthusiasm:thumbup:!
Welcome ( 欢迎) and I hope you will be here on the Forum frequently!
:beerchug:
05-31-2013, 01:52 AM
May Liu
:bounce:I am so excited that you understand Chinese. I am newbie of Forum and RC boat, and speak poor English, we just call it Chinglish.
05-31-2013, 02:00 AM
tlandauer
Quote:
Originally Posted by May Liu
:bounce:I am so excited that you understand Chinese. I am newbie of Forum and RC boat, and speak poor English, we just call it Chinglish.
Your English is really excellent! Yes, I know about Chinglish, but overall the level of English in China is very good. Years ago I went to Japan and I expected the English level to be very high, to my surprise at least the conversational ability was just about the same. ( as in China)
Which part of China is GD, is it Guangdong province? Land of all ESC and brushless motors! :lol:
05-31-2013, 02:43 AM
May Liu
Quote:
Originally Posted by tlandauer
Your English is really excellent! Yes, I know about Chinglish, but overall the level of English in China is very good. Years ago I went to Japan and I expected the English level to be very high, to my surprise at least the conversational ability was just about the same. ( as in China)
Which part of China is GD, is it Guangdong province? Land of all ESC and brushless motors! :lol:
Haha, I have been to Japan last year, to attend my friend's wedding. When I asked some questions of their products in the shop there, nobody understood me. I am not sure whose problem it was. myslef or the saleslady? or both of us?
Yes, I'm from Guangzhou city, Guangdong province. There are 1-2 factories producing good ESC and motors. It seems that you really know China very well.
05-31-2013, 03:08 AM
tlandauer
Quote:
Originally Posted by May Liu
Haha, I have been to Japan last year, to attend my friend's wedding. When I asked some questions of their products in the shop there, nobody understood me. I am not sure whose problem it was. myslef or the saleslady? or both of us?
Yes, I'm from Guangzhou city, Guangdong province. There are 1-2 factories producing good ESC and motors. It seems that you really know China very well.
:spy: :lol:
Anyway, I just noticed that this is a sticky, I am not sure if it's like a normal thread, this serves as a tutorial post. This is more like a notice board, I am sure we can start another post if you have any questions in general.
I thought 深圳 ( Shen Zhen) is the place for most of the RC Hobby factories , hard to imagine all those brands are in one place.:w00t:
05-31-2013, 04:04 AM
May Liu
:tongue_smilie:shame....
07-01-2013, 02:24 AM
Monica Smith
I think the "YOUTUBE" just bans the IP comes from China!:flashfire: