Attachment 175718
Attachment 175719
Attachment 175720
Attachment 175721
Carbon Raptor P limited Hydro
Aeromarine Mean Machine P limited cat
Raider 34 P-limited and P-mono
Boatech 34 OPC tunnel
Printable View
Attachment 175718
Attachment 175719
Attachment 175720
Attachment 175721
Carbon Raptor P limited Hydro
Aeromarine Mean Machine P limited cat
Raider 34 P-limited and P-mono
Boatech 34 OPC tunnel
Attachment 175722
Attachment 175723
Attachment 175724
Black Pearl 31" P limited Sport hydro
Black Pearl 33' P-Sport hydro
Aeromarine Sprint Cat P-Cat
Your not going to slide in under the radar!
Best of luck!
Mic
See you there Bob!
Lookin' GOOD! Always love your builds. Construction is solid and they track and handle well. Good luck!
Looking forward to seeing and racing with you Oscar.Quote:
Originally Posted by oscarel
Good luck Bob!
Hope you will be able to pit by us again. see ya soon!
That's the plan Randy. Looking forward to seeing you guys.Quote:
Originally Posted by RandyatBBY
Thanks Ray!Quote:
Originally Posted by ray schrauwen
NIce fleet Bob. What extra was needed or added to round off the sponson tips like that? I really like and prefer that.Quote:
Originally Posted by mojoracer
I hope racing went well for you.
Race starts on the 15th, and the boats made it to California today!Quote:
Originally Posted by ray schrauwen
I added scraps of plywood to the top and bottom horizontal frame at the tips. I also added curved pieces to the sponson sheer on top of it (between each cross frame). This gives you enough meat to round things off, and attach the sheeting. The Miss Budweiser guys did this in the early 1990s after studying blow overs in a wind tunnel. Now it is common practice on real hydroplanes to have blunt sponson tips and rounded sheers around the sides.
Whoops, o.k.
Thank you for being candid with your mods, heck, I just thought it looked way better, performance changes are a nice bonus!
Camp Mojo Sea Side CA
Attachment 176079
Poker Chip stacking
Attachment 176080
Victory wine Chateaunuf dU Pape
Attachment 176081
My friend Glenn Matos is a great pit man!
Attachment 176082
Trophies that light up!
Attachment 176083
Great pics! Congrats!
Bob, it was a pleasure to meet you. Consider coming to Huntsville next year. I promise not to screw up any of your heats.
Lohring Miller
Same here Lohing! I am planning on being there! Only a short 10 hour drive from home!Quote:
Originally Posted by lohring
Does this look right Bob? I hope so, no can add anymore. There is same on bottom..
Just need to seal flotation and skin it.Attachment 176890
Looks good Ray. I just added to the top of the sponson sheer, and the tips.Quote:
Originally Posted by ray schrauwen
Thank you!
I ran my BP P LTD at the D9 didtrict race and got a third over all dialing in the boat. Did some movements to the CG put it about 1/2 inch behind the heal of the sponson and dropped the strut a little. I just ran it at seasidein real rough water, it looked good. We will see how it runs at Tracy this week end.