seaking 180a esc or swordfish 220 and leopard 4082

hey guys i am rebuilding a boat of mine and am looking for either the hobby wing 180a esc or a swordfish 220 aswell as a leopard 4082, let me know if anyone has anything!!!

Thanks

What motor kv and voltage?

range of 1600kv to 2000kv

bump

Say I have a T-180 V3 I'll let go of for $75 shipped

is it used, how many runs?

yea its used, has about a dozen runs on it. was working good when I took it out. I have a leo 4074 2200kv motor also.

would you take 60 im not super fond of the turnigy 180s have had bad experiences with them but it will work with my setup

I have a brand new unopened leopard 4082 2000kv motor i can let go of. It was purchased brand new from OSE. Here is a link to it (https://www.offshoreelectrics.com/pr...?prod=leo-4082)
Again i have a 2000Kv version. Please let me know if you are interested.

dang i ended up buying a motor last night... i am still looking for a esc though

I have a Brand New Turnigy AquaStar 200Amp ESC that i would let go of for 100$ plus 10$ for flatrate priority shipping.

Here is a link to the product
https://hobbyking.com/en_us/turnigy-...rless-esc.html

dang i would like the ability to run 4s.

I have a 2s/6s 220/300 amp swordfish pro + rsc with data logging and bec has 6 runs on it very good condition works great $100.00 plus $10.00 for shipping

SOLD !!!!

Attachment 155308
Attachment 155309

I have a like new Seaking 180 and programming box.
I have only used it on some short test runs.
Less than 10 minute total. Still have box and paperwork.
I would be happy with $100 for both or even make me an offer.
Thx,
Ken

Rule of thumb buy a esc that will handle more amprage than you will produce better to be safe then sorry my personal opinion 220amp esc over a 180amp esc.....

I ran a leopard 4082 - 1450kv motor on 6s with up to a 45mm prop and my max amp spikes were under 160 amps. This was a deep-v mono hull running the Turnigy marine T180.