[EDITED] As per Raydee's tip in post #71, this short piece of 1/4" tubing stays in the boat.
I'll pre-bend 7/32" tubing to 12 degrees. It will slide into the 1/4" tubing. I will be running a 3/16" flex cable without a teflon liner. This tip was from Greg Schweers(7/32"tubing, NOT 1/4"!).
Greg also sent me pictures of the 1/4" tubing loctited in the strut shown in the sketch below in post #154.
So, I can change out a damaged stuffing tube without cutting everything out of the boat.
Great stuff guys!
https://uploads.tapatalk-cdn.com/201...5d6cfad85e.jpghttps://uploads.tapatalk-cdn.com/201...5759ff2276.jpg
Sent from my SM-G950U1 using Tapatalk