5 Attachment(s)
Darin's Method for Making Paralelling Adapters
Thought I'd share my method of making Paralleling Adapters. These are made with 5.5mm contacts from, where else? OffshoreElectrics.com.
I use Copper Tubing to provide a solid joining of the three contacts.
I drill an appropriate sized hole all the way through the middle contact, and just through one side of each of the outside, then press them together.
Attachment 143851
Attachment 143852
Then I solder them together, filling in the wire barrels as well, and cover with heat-shrink. Pretty basic. Seem to work very well.
Attachment 143853
Attachment 143854
Attachment 143855