Selling some boats

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kburrows
    Senior Member
    • Mar 2008
    • 547

    #1

    Selling some boats

    Well since its getting cold, am not going to use these so here is what i gat.

    First up 22x8 Red Highwing ABS boat, makes a great rescue boat but needs TLC:
    Hull and Hatch
    BJ outdrive
    AutoBailer
    Motor mount
    Receiver
    Servo
    Flotation and balloon/small straps

    The hulls is very scratched on the bottom but no leaks, there is one crack near the top right of the stern, but can be easily fixed, actually its to high up to even get wet. It is self righting too. Am thinking $60 shipped

    Second last time up, my Flash assembled. 26x7.5 fiberglass boat, one step hull:
    Hull and hatch
    Hardware
    SV motor with cooling/coupler/hose, less than eight runs
    SV esc converted to one dean connector for lipo, but comes with y harness
    less than eight runs.
    SV flex cable with drive dog and lock nut.
    Needs straight shaft,servo mount,RX and TX,TLC and a New owner.

    Porp not included

    This boat has touched the water about four times, and is a great hull but never finished building it properly. It really deserves lipo power but never got that far and dont think i willl use lipos. So its $160 shipped
    Attached Files
  • Meniscus
    Refuse the box exists!
    • Jul 2008
    • 3225

    #2
    I didn't see any Gorilla glue on these! LOL

    Do you have any video of these hulls? I'm not familiar with them.
    IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

    MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

    Comment

    • kburrows
      Senior Member
      • Mar 2008
      • 547

      #3
      for the most part gorrila glue was used in the stern but i clean them out well, its cool because it hold really good but can be cleaned and does not leave a resedue, for vids check these links
      http://s390.photobucket.com/albums/o...t=CIMG3488.flv

      Comment

      • Meniscus
        Refuse the box exists!
        • Jul 2008
        • 3225

        #4
        I like the second video. It really is a flash.
        IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

        MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

        Comment

        • kburrows
          Senior Member
          • Mar 2008
          • 547

          #5
          boats being parted, I guess i will keep the hulls til it gets warmer. If any one is interested we can strike a deal

          Comment

          • HoustonDominant
            Member
            • Apr 2007
            • 54

            #6
            PM sent about flash

            Comment

            • kburrows
              Senior Member
              • Mar 2008
              • 547

              #7
              Flash sold to houston, highwing now $45 shipped

              Comment

              • kburrows
                Senior Member
                • Mar 2008
                • 547

                #8
                will trade this high wing for an x642 or a good balanced 42mm 3 blade and 42mm 2 blade prop.

                Comment

                • kburrows
                  Senior Member
                  • Mar 2008
                  • 547

                  #9
                  flash sold and shipped, new price for the red highwing is 40 shipped or make me an offer i just need it gone, will consider any offer

                  Comment

                  • HoustonDominant
                    Member
                    • Apr 2007
                    • 54

                    #10
                    Flash arrived yesterday in great condtion. Thanks for the deal!

                    JD

                    Comment

                    Working...