Highly modified tear into jet boat RTR with radio and battery + New spare jet pump

[f.a.r.m.e.r]

I built this NQD to be efficient and run smoother and for really easy maintanence.

This is ready to run with radio and battery

Mods i made to the pump, A stuffing box with oil lite bearings and drilled out the housing to fit it i also drilled the top of the housing and stuffing box and added a greasing nipple to the top, added 098 flex cable. added water pick up for cooling on the stator this boat runs really cool.

Also added a metal intake grate to keep out rocks

For power and electronics

Leopard 2445 3400kv inrunner

Water jacket on the motor

50a water cooled esc waterproof

Evox Mini 16gram servo waterproof

blueprinted the pump and the prop

re-enforced the stator and sharpened the fins

Removed the 2.3mm shaft and installed an Octura .098 flex cable

Aeromarine aluminum water outlet

This boat is New i just built it and took it for 2 runs to test it and make sure it runs well

Comes with a spare Brand new complete pump with shaft impeller/prop, stator and nozzle with bushing and front rubber seal

Here are some pics

and the test run video

ASKING 220.00 PAYPAL FEE's INCLUDED BUYER PAYS SHIPPING Local pick up in the bay area aswell


Will need your address for shipping quotes

[f.a.r.m.e.r]

More Pictures

[Scott M]

Wow! nice job you up for any trades?

[f.a.r.m.e.r]

Wow! nice job you up for any trades?

Thanks!

Sure I'm up for trade's. I'm mostly into boats though :)

[78MaicoRider]

If you are interested in trades, how about a 41" SprintCat?

[f.a.r.m.e.r]

If you are interested in trades, how about a 41" SprintCat?

Got any pics?

[78MaicoRider]

If you are interested I will take whatever photos you would like. I bought the boat here from Tunnelvision. Here's one of the boat and one shot of the custom water cooled motor mounts that work great
IMG-20150718-00688.jpgIMG00012-20131101-2353.jpg

[78MaicoRider]

This is a true AeroMarine Laminates hull. Not a knock off. It was layed up without stringers for FE use. AeroMarine says it's 42" long. The boat has twin 3/16 stingers with 3/16 counter rotating flex cables. Teflon lined stuffing tubes. Speedmaster rudder with custom mount and servo arm for push pull two pushrod control and Hitec servo. The custom motor mounts have though hull water pick up built in. From there to ESC and back to motor mount for visible discharge out the side. The short path (about 10" total including components) makes for great water flow. There are just two runs on this hardware. I think this hull and hardware is well worth the $220 you are asking.

[Shane_744]

This boat still available?

[f.a.r.m.e.r]

Sorry guys forgot to post it sold LPU