Very Rare ML Boatworks PS295 Tunnel , RTR

[gizmo1]

Ok Guys This Hurts .

Up For Grabs , My pride of the fleet ML Boatworks PS295

These are getting harder , and harder to find , and this one is a Gem .

The Hull is marked # 2 inside the radio box .

The boat is Super Clean , No Repairs , No damage and is dialed in .

I just went through it and replaced some parts , see below.

Brand New Hobbywing/Seaking V3 120A ESC
Brand New Aquacraft 2030KV Motor ( UL-1 )
Brand New Finned Cooling Jacket
Brand New Cooling Lines
Brand New Flex , also comes with a spare
Brand New OS Conversion coupler set up , with spare collet
Brand New Prop Graupner 2317.42 , also including a NIP 2317.45
Brand New Traxxas 2075 Waterproof servo with Billet Horn
Brand new 4-40 Steel Steering Rods , with New Carbon Fiber Tube reinforcement
Brand New Boots on steering rods
Brand New Sullivan Billet Quick release Rod Ends on steering rods
Brand New Tactic TTX240 radio Transmittor
Brand New Tactic TR324 Receiver, new SCT version
Brand new Castle 5.5 Bullets
The Lower Unit has been Polished to a Mirror Finish
Reinforced Lower Cowl at the lip

I am also including the PVC Stand.

I will Not part the boat out , and No trades

$ 650.00 Shipped FedEx , Insured , Signature required
It will be packed Very Well

You Must post up in thread to purchase as per the forum rules.
PM's only to get paypal details
I will take phone calls to discuss any questions if there are any and you feel more comfortable by phone
I only ask that you call if you are a serious buyer 832-458-7132

This is for sale on other venues

[gizmo1]

More pics

[FORT-26]

Does anyone sell these hulls anymore? I've been looking all over. From what I understand, the original designer sold the plans to a friend, so he could continue producing the kits....???

Any insight on this?

-Chad

[JimClark]

The answer is yes but take it to a discussion forum please not the for sale forum. You might even find your answer if you search OSE for it. Or you could pm Mike L for the answer

Sent from my SGH-M919 using Tapatalk

[cybercrxt]

I will confirm, this is the #2 PS295 ever built. I built it originally for a friend on here, Diegoboy. He painted the cowling. I made a matching Navy GP310 sport for him shortly after, which was the prototype hull of that lineup. The Prototype PS295 is the only one to never have the PS295 laser etched on the radio box, and originally had an orange Winston Eagle theme cowling. Best of luck with your sale. If I had the money, I would buy it back, it is what it is! Anyone needing info on the ML Tunnel lineup can PM, but please do not post questions as Jim asked on this thread. Thanks, Mike Luszcz

[gizmo1]

Thanks Mike for Verifying / Validating the Boat .

[SJFE]

Not to get more off subject but I now have the matching Navy GP310 sport hydro. What a nice setup.

[tlandauer]

Fabulous tunnel indeed, I do have a question, as I have seen and for years now from Diegoboy's album, http://forums.offshoreelectrics.com/...chmentid=52784 http://forums.offshoreelectrics.com/...chmentid=53362, his does have the PS295 etched on the side of the radio box, is this another one of his? I ask because I own the other prototype hull Mike built for himself which indeed is without the etching.
Sorry for the question, but I am a bit of a history buff on this tunnel. I read the thirty some pages of the built log. I might have missed this little fact though.
Also: from the first picture in the second group, I see your water intake is a red line, photo shows the out going line disconnected, the layout for the ESC is as such that how difficult is routing the tube, looks like it is curled quite a bit, have you run it that way, any restriction?
Forgive me for asking these pointed questions as I am very tempted but I don't want to spend time to redo it and the Seaking 120ESC v2 is extinct so I want to make sure there is no headache down the road.
Thanks!

[cybercrxt]

Only the first hull, the one you must have tlandauer, doesn't have the laser etched PS295 on the radio box. This one for sale is #2 and it was basically the first production hull built. I built both yours, and this one! Mike

[cybercrxt]

Here is the first video ever of a PS295...This was the protoype hull tlandauer...2011...I had not even painted the cowling yet! Brings back memories of the fun times when I really enjoyed tunnels.

[gizmo1]

Fabulous tunnel indeed, I do have a question, as I have seen and for years now from Diegoboy's album, http://forums.offshoreelectrics.com/...chmentid=52784 http://forums.offshoreelectrics.com/...chmentid=53362, his does have the PS295 etched on the side of the radio box, is this another one of his? I ask because I own the other prototype hull Mike built for himself which indeed is without the etching.
Sorry for the question, but I am a bit of a history buff on this tunnel. I read the thirty some pages of the built log. I might have missed this little fact though.
Also: from the first picture in the second group, I see your water intake is a red line, photo shows the out going line disconnected, the layout for the ESC is as such that how difficult is routing the tube, looks like it is curled quite a bit, have you run it that way, any restriction?
Forgive me for asking these pointed questions as I am very tempted but I don't want to spend time to redo it and the Seaking 120ESC v2 is extinct so I want to make sure there is no headache down the road.
Thanks!

Not a problem my friend.
This boat is etched it is just not showing up in the pics, I just took a couple of the boat and will post them , it is still hard to see my camera is not the best , but the etching is on both sides of the radio box.
I have also talked to Mike and confirmed without a doubt this is the #2 built 295 , which he considers to the be the 1st production 295.
The markings inside the radio box have been verified by Mike as well.

man if you have the Prototype 295 and add this one, that would be something !!!

As for the cooling line it works fine, no issues, but if you want me to run the line different I can do so .

[gizmo1]

etching pics added

I can try with my phone and text these as well for buyer.

[tlandauer]

Only the first hull, the one you must have tlandauer, doesn't have the laser etched PS295 on the radio box. This one for sale is #2 and it was basically the first production hull built. I built both yours, and this one! Mike

Thanks Mike,
my bad, I miss understood what you said. I hope my question was not perceived as my doubts of what you have said. I was too worked up when I saw this one is for sale. lol....

Here is the first video ever of a PS295...This was the protoype hull tlandauer...2011...I had not even painted the cowling yet! Brings back memories of the fun times when I really enjoyed tunnels.

Thanks for the maiden video!! Love it.
P.S. here is the first run after I got it from Tucker:

I was being too careful when I turned the boat, lol... this runs like it's on rails.

[tlandauer]

Not a problem my friend.
This boat is etched it is just not showing up in the pics, I just took a couple of the boat and will post them , it is still hard to see my camera is not the best , but the etching is on both sides of the radio box.
I have also talked to Mike and confirmed without a doubt this is the #2 built 295 , which he considers to the be the 1st production 295.
The markings inside the radio box have been verified by Mike as well.


man if you have the Prototype 295 and add this one, that would be something !!!

As for the cooling line it works fine, no issues, but if you want me to run the line different I can do so .

etching pics added

I can try with my phone and text these as well for buyer.

Thanks for your reply!
I would love to purchase this from you, I don't like to low ball any respected boaters, I know it is a large item, would you be offended if we share some of the shipping charge?
LMK, thanks in advance!

Zip is CA 91006

[gizmo1]

pm sent with paypal information and shipping information.
Thank You .