FOR SALE - Miss Elam 1/8th scale

[don ferrette]

Well this is one those that I truly hate to part with but to fund a new project I am reluctantly doing so. For sale is my 2006 U-1 Miss Elam FE 1/8th scale. This is the ML Boatworks Extreme series build and will only need motor, ESC, lipos and prop to be race ready. There are numerous people here on OSE that have seen it run (and win) and know this is a first rate ride. With a NEU 1527 1.5Y on 10S (5000mah or higher), good ESC (ETTI 220 OPTO is excellent), and detongued X450/3 this scale will run 65-70mph and handle like a dream. Has all top end gear including the Peter Zicha motor mount (with ESC plate), Tyndall turn fin, CMDi rudder assembly, Speedmaster strut, Futaba 9152 digital hi torque servo and 603FS FASST 2.4 RX, LiFe RX battery also included. Paint is all top line PPG Concepts acrylic urethane, graphics from Mike McKnight (complete set of extra graphics for rear wings included). Battery area will accommodate up to 10S 6000mah packs (two GiantPower 5S 6000s have been test fit). There are build pics available on request and a good number of them were also posted on Speed810s build thread - http://forums.offshoreelectrics.com/...uild-Miss-Elam

Asking price is $1500 plus packing and shipping and payment requested via bank check or postal money order.

SOLD

[don ferrette]

more pics-

[jevmax]

Well this is one those that I truly hate to part with but to fund a new project I am reluctantly doing so. For sale is my 2006 U-1 Miss Elam FE 1/8th scale. This is the ML Boatworks Extreme series build and will only need motor, ESC, lipos and prop to be race ready. There are numerous people here on OSE that have seen it run (and win) and know this is a first rate ride. With a NEU 1527 1.5Y on 10S (5000mah or higher), good ESC (ETTI 220 OPTO is excellent), and detongued X450/3 this scale will run 65-70mph and handle like a dream. Has all top end gear including the Peter Zicha motor mount (with ESC plate), Tyndall turn fin, CMDi rudder assembly, Speedmaster strut, Futaba 9152 digital hi torque servo and 603FS FASST 2.4 RX, LiFe RX battery also included. Paint is all top line PPG Concepts acrylic urethane, graphics from Mike McKnight (complete set of extra graphics for rear wings included). Battery area will accommodate up to 10S 6000mah packs (two GiantPower 5S 6000s have been test fit). There are build pics available on request and a good number of them were also posted on Speed810s build thread - http://forums.offshoreelectrics.com/...uild-Miss-Elam

Asking price is $1500 plus packing and shipping and payment requested via bank check or postal money order.

Don,
Just two questions. Do you think that a Schulze 40-160wk will fit under the sub-hatch, and approximately what would be the cost of packing and shipping to Texas zip code 77493?

Thanks,
Jim

[don ferrette]

Don,
Just two questions. Do you think that a Schulze 40-160wk will fit under the sub-hatch, and approximately what would be the cost of packing and shipping to Texas zip code 77493?

Thanks,
Jim

Funny you should ask as that is exactly the ESC I ran. Let me look into shipping tomorrow and I'll get back to you as soon as possible.

[don ferrette]

Jim I sent you a p/m with some questions about shipping destination.

[don ferrette]

SOLD to Jim.

[Doby]

Curious..what did it sell for?

[don ferrette]

Curious..what did it sell for?

$1500 plus shipping.

[Doby]

Excellent, glad you got your price...beautiful boat!