Tweet
SOLD
I have to sell this awesome boat. I have ran it a couple times and it ran flawless. I have only used the SAW sponsons on the boat. It will come with the servo ( Align BL700H ). I have sprayed the fuselage and SAW sponsons with automotive clear coat, the oval sponsons have not been used yet. The only thing I have done to the hull is put the antenna holder in and added a water outlet at the rear. I soldiered the water inlet and outlet pipes to a plate of brass to hold them in place so I would not have to add any supports to the inside of the hull, making it hard to remove the hardware if need be. I had to modify the rear motor support to hold my 1527. I have run two different set ups in it. a 6s with 2200kv & m445, pulled a peak of 180 amps and was around 80+ mph. and a 12s with 825kv & oct2050 and a peak of 93 amps and was around 100mph. my gps does not work in this boat and it is shutting off so hard to get exact numbers. Asking $700 shipped to lower. paypal only. Motor, esc & receiver not included
I have to sell this awesome boat. I have ran it a couple times and it ran flawless. I have only used the SAW sponsons on the boat. It will come with the servo ( Align BL700H ). I have sprayed the fuselage and SAW sponsons with automotive clear coat, the oval sponsons have not been used yet. The only thing I have done to the hull is put the antenna holder in and added a water outlet at the rear. I soldiered the water inlet and outlet pipes to a plate of brass to hold them in place so I would not have to add any supports to the inside of the hull, making it hard to remove the hardware if need be. I had to modify the rear motor support to hold my 1527. I have run two different set ups in it. a 6s with 2200kv & m445, pulled a peak of 180 amps and was around 80+ mph. and a 12s with 825kv & oct2050 and a peak of 93 amps and was around 100mph. my gps does not work in this boat and it is shutting off so hard to get exact numbers. Asking $700 shipped to lower. paypal only. Motor, esc & receiver not included
Comment