Tweet
Guys,
I have a very lightly used YGE320HV with Program Card III. I added brass tubing to each power board to make this into a marine 320HV. I ended up using Schulzes instead and this is just sitting around being unused. I did remove the stock shrink in order to add the tubes, but I did not conformal coat. It is shrink wrapped now with PVC shrink.
I have bench tested with several motors to validate operation. I guarantee this works when you receive it and will return a full refund if you bench test and see otherwise.
Asking $525 shipped CONUS, I will ship overseas with buyer paying actual shipping costs. Questions or more pics, just ask.
Tyler
IMG_0651.jpgIMG_0653.jpg
Specs for the YGE320HV
- 320A maximum continuous full power current with adequate cooling.
- 460A peaks
- 4 to 14s LiPo, with under voltage protection by power reduction.
- disconnectable under voltage detection.
- optocoupler.
- Speed regulation (Governor mode).
- Soft start.
- Active free-wheel, allowing unlimited part load operation.
- Automatic or 6 step adjustable timing.
- Continuously adjustable F3A brake.
- 3 steps adjustable regular back EMF brake.
- Switching rate: 8 to 16 kHz
- Speed limit: 240,000 RPM (2-Pole motors)
- Temperature and overload warning.
- Anti sparkling circuit: reduces connection sparkles
- Programming with the ProgCard III
- Weight 208g, 300g with cables
- Dimension 69mm x 53mm x 50mm
I have a very lightly used YGE320HV with Program Card III. I added brass tubing to each power board to make this into a marine 320HV. I ended up using Schulzes instead and this is just sitting around being unused. I did remove the stock shrink in order to add the tubes, but I did not conformal coat. It is shrink wrapped now with PVC shrink.
I have bench tested with several motors to validate operation. I guarantee this works when you receive it and will return a full refund if you bench test and see otherwise.
Asking $525 shipped CONUS, I will ship overseas with buyer paying actual shipping costs. Questions or more pics, just ask.
Tyler
IMG_0651.jpgIMG_0653.jpg
Specs for the YGE320HV
- 320A maximum continuous full power current with adequate cooling.
- 460A peaks
- 4 to 14s LiPo, with under voltage protection by power reduction.
- disconnectable under voltage detection.
- optocoupler.
- Speed regulation (Governor mode).
- Soft start.
- Active free-wheel, allowing unlimited part load operation.
- Automatic or 6 step adjustable timing.
- Continuously adjustable F3A brake.
- 3 steps adjustable regular back EMF brake.
- Switching rate: 8 to 16 kHz
- Speed limit: 240,000 RPM (2-Pole motors)
- Temperature and overload warning.
- Anti sparkling circuit: reduces connection sparkles
- Programming with the ProgCard III
- Weight 208g, 300g with cables
- Dimension 69mm x 53mm x 50mm