Tweet
SOLD
Well, not so much fully any more (can't change the title though). I spent the morning changing some of the upgrades back to stock so I can now offer this at a substantially reduces price.
Most already know the stock boat, so I'll list what it did to upgrade it:
• RxR - you provide the receiver
• Changed the ESC back to stock - only 5 packs run through
• Changed the servo back to stock - never been used
• Changed the prop back to stock (L42 X 55) - S&B but never been used
• Changed the motor back to stock 1800kv - 10 packs run through
• RxR (like I bought it) - you provide the receiver
• OSE Upgraded Flex Shaft (also have a Kintec Upgraded Flex Shaft)
• Aeromarine 2 piece SS collet
• OSE Bullet Nut for 3/16" shaft
• Castle Creations 5.5mm Bullet Connectors on everything
• carbon fiber battery tray over 1/8" ply
• two part foam in the bow
• extra glass to reinforce the motor and servo mounts
• reinforced stuffing tube support
• nyloc nuts added on all transom fittings
• upgraded steering rod ends
• through hull fittings for both water inlet and outlet
• finishing resin to smooth out the interior finish
If you need a 4S battery, I can make you a good deal on a ThunderPower G6 4400mAh 45C Battery.
This boat is as close to bullet proof as can be made and will run mid to high 40's all day long on a m445 prop.
You may ask why I'm selling........good question. This was my first FE boat that I picked up in this spring. I've more or less taken this boat to the limits of the hull. Now that I'm hooked, I want to build one from scratch that's bigger and badder.
If I was keeping the boat, I'd probably repaint it once the snow flies. Not that anything is wrong with it, I'm just a perfectionist. Just one tiny nick (as shown in the pic) the size of a pinhead from where my Lab tried to retrieve it.
Price drop to $225 and you pay the shipping. I'm a Canuck seller so cheap shipping (and no taxes) for you guys north of the 49th.
Well, not so much fully any more (can't change the title though). I spent the morning changing some of the upgrades back to stock so I can now offer this at a substantially reduces price.
Most already know the stock boat, so I'll list what it did to upgrade it:
• RxR - you provide the receiver
• Changed the ESC back to stock - only 5 packs run through
• Changed the servo back to stock - never been used
• Changed the prop back to stock (L42 X 55) - S&B but never been used
• Changed the motor back to stock 1800kv - 10 packs run through
• RxR (like I bought it) - you provide the receiver
• OSE Upgraded Flex Shaft (also have a Kintec Upgraded Flex Shaft)
• Aeromarine 2 piece SS collet
• OSE Bullet Nut for 3/16" shaft
• Castle Creations 5.5mm Bullet Connectors on everything
• carbon fiber battery tray over 1/8" ply
• two part foam in the bow
• extra glass to reinforce the motor and servo mounts
• reinforced stuffing tube support
• nyloc nuts added on all transom fittings
• upgraded steering rod ends
• through hull fittings for both water inlet and outlet
• finishing resin to smooth out the interior finish
If you need a 4S battery, I can make you a good deal on a ThunderPower G6 4400mAh 45C Battery.
This boat is as close to bullet proof as can be made and will run mid to high 40's all day long on a m445 prop.
You may ask why I'm selling........good question. This was my first FE boat that I picked up in this spring. I've more or less taken this boat to the limits of the hull. Now that I'm hooked, I want to build one from scratch that's bigger and badder.
If I was keeping the boat, I'd probably repaint it once the snow flies. Not that anything is wrong with it, I'm just a perfectionist. Just one tiny nick (as shown in the pic) the size of a pinhead from where my Lab tried to retrieve it.
Price drop to $225 and you pay the shipping. I'm a Canuck seller so cheap shipping (and no taxes) for you guys north of the 49th.
Comment