Tweet
I am getting out of RC hobbies due to the lack to time and interest. Up for sale are the only two boats I have remaining so here goes...
First up is a new jig built from Zipp never set up mini sprint. I purchased the pre-built sprint, mini servo, extra flex shaft and 3500 kv 2223 5 turn outrunner directly from Zipp on May 21st for $213.45 shipped and never completed the build. I also purchased, from another source, a brand new Scorpion Commander 55A esc with programming module and a brand new Scorpion HKII-2221-6 motor. I know the motor is overkill but if you can get it dialed in then the sprint should be a mini missile. I also purchased several other items from OSE to go along with this build such as an aluminum L bracket rudder assembly to eliminate the weak stock wood bracket to handle the additional power and speeds. Lots of other extras purchased as well..
Second is a used Atomik Barbwire which is pretty much stock minus a brass prop nut and water outlet. There are 5 batteries included which are as follows:
4 x GForce 3S 1300 40c bought new on May 2nd and also balance charged and 80/20 rule followed.
1 x Venom 3S 2100 20c that is in good condition but it was used so I can't guarantee the life of it.
Also included, if needed, is a Futaba R204GF-E rx that was also purchased new.
I would like to sell all of this together for $525 shipped and paypaled.
If you just want the mini-sprint then that price is $350 shipped and paypaled for the boat, esc and two motors plus all the parts pictured. Batteries will not be included.
Barbwire with batts and rx is $185.00 shipped and paypaled and $150 without the rx.
Again all of this is new outside of the Barbwire and batteries!
Let me know if you have any questions or need any other pics.
Thanks!
PS.. I have plenty of feedback under the same ID on runryder, helifreak and ebay!
Boats 002.jpgBoats 003.jpgBoats 006.jpgBoats 005.jpg
First up is a new jig built from Zipp never set up mini sprint. I purchased the pre-built sprint, mini servo, extra flex shaft and 3500 kv 2223 5 turn outrunner directly from Zipp on May 21st for $213.45 shipped and never completed the build. I also purchased, from another source, a brand new Scorpion Commander 55A esc with programming module and a brand new Scorpion HKII-2221-6 motor. I know the motor is overkill but if you can get it dialed in then the sprint should be a mini missile. I also purchased several other items from OSE to go along with this build such as an aluminum L bracket rudder assembly to eliminate the weak stock wood bracket to handle the additional power and speeds. Lots of other extras purchased as well..
Second is a used Atomik Barbwire which is pretty much stock minus a brass prop nut and water outlet. There are 5 batteries included which are as follows:
4 x GForce 3S 1300 40c bought new on May 2nd and also balance charged and 80/20 rule followed.
1 x Venom 3S 2100 20c that is in good condition but it was used so I can't guarantee the life of it.
Also included, if needed, is a Futaba R204GF-E rx that was also purchased new.
I would like to sell all of this together for $525 shipped and paypaled.
If you just want the mini-sprint then that price is $350 shipped and paypaled for the boat, esc and two motors plus all the parts pictured. Batteries will not be included.
Barbwire with batts and rx is $185.00 shipped and paypaled and $150 without the rx.
Again all of this is new outside of the Barbwire and batteries!
Let me know if you have any questions or need any other pics.
Thanks!
PS.. I have plenty of feedback under the same ID on runryder, helifreak and ebay!
Boats 002.jpgBoats 003.jpgBoats 006.jpgBoats 005.jpg