Tweet
Fast boat, flat sanded and filled the sponson bottoms, very fast with a UL-1 motor.
One small spot on the back of the boat where the tape lifted the paint, paint has cracked around the stuffing tube but the JB weld is solid. No cracks or damage otherwise.
Hughy flex cable, etti mount, Kinetec servo mount, inline strut and rudder. 4-40 pushrod and clevises.
160$ firm shipped with 200$ insurance Canada or Con US only.
Usual rules apply, all questions here.
Will consider trades for motors or escs etc, don't need another boat, not at all interested in car stuff, no heli stuff.
The price is firm at 160$ shipped!
If it doesn't sell that's OK I have a nice Lehner ready to go in it and I'll run it as a 2s setup for s**ts and giggles.
If somebody wants to chase some P spec SAW numbers check out what Properchopper (Tony) has done with his and a UL-1 motor! Think he has gone over 60mph on that setup!
IMG_7483.jpgIMG_7484.jpgIMG_7486.jpgIMG_7487.jpgIMG_7488.jpg
One small spot on the back of the boat where the tape lifted the paint, paint has cracked around the stuffing tube but the JB weld is solid. No cracks or damage otherwise.
Hughy flex cable, etti mount, Kinetec servo mount, inline strut and rudder. 4-40 pushrod and clevises.
160$ firm shipped with 200$ insurance Canada or Con US only.
Usual rules apply, all questions here.
Will consider trades for motors or escs etc, don't need another boat, not at all interested in car stuff, no heli stuff.
The price is firm at 160$ shipped!
If it doesn't sell that's OK I have a nice Lehner ready to go in it and I'll run it as a 2s setup for s**ts and giggles.
If somebody wants to chase some P spec SAW numbers check out what Properchopper (Tony) has done with his and a UL-1 motor! Think he has gone over 60mph on that setup!
IMG_7483.jpgIMG_7484.jpgIMG_7486.jpgIMG_7487.jpgIMG_7488.jpg
Comment